Classe Audio CP-500 owner manual Rear Panel, Tape Input, Single-ended RCA inputs, Ground terminal

Page 14

optional phono preamp

14

Rear Panel

1Tape Input

Connect the analog outputs of any recording device (analog tape recorder, digital tape recorder, CD recorder, etc.) you may have to these single-ended RCA connectors. You may select to hear the output of your recording device by touching the tape button on the main operational screen of the CP-500.

2Single-ended (RCA) inputs

These RCA jacks accept right-channel and left-channel (single-ended) inputs from line-level source equipment such as tuners, CD players, and tape decks. Any of these inputs may be selected by touching the corresponding button on the main operational screen of the front panel touchscreen.

To achieve the best possible results, we suggest that you use only high- quality shielded interconnect cables. Please consult with your local Classé dealer for advice on the best cables for use in your system.

If you have a turntable you would like to use with the system, an optional phono preamplifier module is available from your Classé dealer. Once installed in your preamplifier, the Line 1 input connectors become your phono inputs, and the phono gain control in the menu system becomes active, allowing you to select either low gain for all moving-magnet (MM) and high-output moving-coil (MC) cartridges, or high gain for standard output MC cartridges. (See the section The Menu System for more information.)

3Ground terminal

The ground terminal on your integrated amplifier is most often used for the ground wire of a turntable, assuming you have the optional phono module installed (see your authorized Classé dealer for more information on this option if you are interested). Connecting the ground wire from your turntable’s tonearm to this screw terminal usually minimizes any hum or buzzing to which the turntable might otherwise be susceptible. Your authorized Classé dealer can assist you in handling this problem if it should arise.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents CP-500 Preamplifier Page Important Safety Instructions Contents Word about installation Welcome to the Classé familyUnpacking and Placement Placement Ventilation Custom installations Serial numberOperating voltage Warm up/break-in period Please read this manual… Special Design Features Extensive listening tests Extraordinary longevity Standby button & LED indicator Front PanelMute button Menu buttonLCD touchscreen IR windowVolume Knob Single-ended RCA inputs Rear PanelTape Input Ground terminalSingle-ended RCA main outputs Balanced XLR inputsTape output Balanced XLR main outputs IR Input and Output RS-232 Control PortClassé can Bus Control Ports AC Mains Input AC Mains Power SwitchDC Trigger Input and Output Basic Functions Remote ControlInput Selection and Volume Navigation Keys Fkey ControlsMenu System Operational menuMain menu system System setup Rotary Page Input Page Phono gain Triggers Max volume Teach IR Display setup Main balance Remote Fkeys Status Version info SensorsThere is no sound and the Standby LED is not lit TroubleshootingEverything appears to be on, but there is no sound IR remote control seems not to function Only one speaker seems to be playingThere is a hum coming out of the speakers There is a mechanical hum coming from the unitCare and Maintenance Cleaning the cabinetSpecifications Dimensions V2.5 080906

CP-500 specifications

The Classe Audio CP-500 is a high-performance stereo preamplifier that has become a staple in the audiophile community due to its impressive sound quality and innovative design. This preamp is crafted with meticulous attention to detail, aimed at delivering pure audio fidelity and an immersive listening experience.

One of the standout features of the CP-500 is its lightweight yet robust chassis, which is designed to minimize resonance and interference, ensuring that the signal path remains clean. The unit incorporates a sophisticated custom power supply that provides stable and reliable energy, reducing noise and enhancing overall performance.

At the heart of the CP-500's design is its high-quality analog signal path. The preamplifier uses high-grade components, including premium capacitors and resistors, to retain the integrity of the audio signal. This design philosophy is reflected in the preamp's exceptional frequency response and low total harmonic distortion (THD), making it a superb choice for discerning listeners who demand the best from their audio systems.

The CP-500 also features balanced and unbalanced inputs and outputs, providing flexibility for various system configurations. The inclusion of both XLR and RCA connectivity allows users to seamlessly integrate the preamp into their setups, whether they use studio-grade equipment or home audio devices. Additionally, it supports multiple source inputs, making it versatile for any audio collection.

Another notable characteristic is the preamp's intuitive user interface. The front panel includes a clear display and ergonomically placed controls, making it easy to navigate through various settings and source choices. The remote control adds convenience, allowing users to adjust volume levels and switch inputs from anywhere in the listening environment.

Classe Audio places a strong emphasis on compatibility, particularly with their amplifiers, ensuring that the CP-500 works harmoniously with their line of high-performance power amplifiers. This synergy allows for an optimal audio experience, highlighting the capabilities of both the preamp and amplifier, resulting in sound that is both dynamic and nuanced.

In conclusion, the Classe Audio CP-500 preamplifier is a prime example of high-fidelity audio engineering. Its combination of superior build quality, advanced technology, and elegant design makes it an excellent choice for audiophiles seeking to elevate their sound systems. Whether used for critical listening or simply enjoying music, the CP-500 delivers an exquisite sonic experience that stands the test of time.
Top Page Image Contents