Eiki LC-XG300L*, LC-XG250L* owner manual To the Owner

Page 2

To the Owner

Before installing and operating the projector, read this manual thoroughly.

The projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in good condition for many years to come.

Improper operation may result in not only shortening the product life, but also malfunctions, fire hazard, or other accidents.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.

Safety Precaution

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This projector produces intense light from the projection lens. Do not stare directly into the lens as much as possible, otherwise eye damage could result. Be especially careful that children do not stare directly into the beam.

Install the projector in a proper position. Otherwise it may result in fire hazard.

Allowing the proper amount of space on the top, sides, and rear of the projector cabinet is critical for proper air circulation and cooling of the unit. The dimension shown here indicate the minimum space required. If the projector is to be built into a compartment or similarly enclosed, these minimum distances must be maintained.

Do not cover the ventilation slot on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous.

SIDE and TOP

REAR

0.7' (20 cm)

1.5' (50 cm)

3' (1 m)

1.5' (50 cm)

If the projector is unused for an extended time, unplug the projector from the power outlet.

NOTE: This symbol and recycle system are applied only to EU countries and not applied to the countries in the other area of the world.

Your EIKI product is designed and manufactured with high quality materials and components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of- life, should be disposed of separately from your household waste.

Please dispose of this equipment at your local community waste collection/recycling centre. In the European Union there are separate collection systems for used electrical and electronic products.

Please help us to conserve the environment we live in!

CAUTION ON HANGING FROM THE CEILING

When hanging the projector from the ceil- ing, clean air intake vents, filters, or top of the projector periodically with a vacuum cleaner. If you leave the projector unclean for a long time, the cooling fans can be clogged with dust, and it may cause a breakdown or a disaster.

DO NOT SET THE PROJECTOR IN GREASY, WET, OR SMOKY CONDITIONS SUCH AS IN A KITCHEN TO PREVENT A BREAKDOWN OR A DISASTER. IF THE PROJECTOR COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY BECOME DETERIORATED.

CAUTION

Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.

Ne peut être utilisé dans une salle d’ordinateurs telle que définie dans la norme ANSI/NFPA 75 Standard for Protection of Electronic Computer/Data Processing Equipment

- 2 -

Image 2
Contents Quick Reference Guide To the Owner Safety Instructions Voor de klanten in NederlandAir Circulation Top ControlInstalling the Projector in Proper Directions Positioning PrecautionsMoving the Projector Transporting the ProjectorInfrared Remote Receiver Front Adjustable Feet 0Exhaust VentFront Back Bottom Kensington Security SlotRear Terminal Front. Reset button 4Infrared Remote Receiver BackTop Control Remote Control STAND-BY button Turn the projector off Wired Remote jack3MENU button Adjustable Feet Remote Control Battery InstallationRemote Control Receivers and Operating Range Lens Installation Attaching the lens to the projectorPositioning the Projector for LC-XG300/XG250 Moving the LensConnecting the AC Power Cord Projector side AC Outlet sideConnecting to a Computer Digital and Analog RGB Cables used for connectionConnecting to Video Equipment Video, S-Video Audio OUT stereoConnecting to Video Equipment Component and RGB Scart PIN Code Input Dialog Box Turning On the ProjectorSelected Input Source and Lamp Control Turning Off the Projector On-Screen Menu How to Operate the On-Screen MenuRemote Control