Eiki LC-XG300L*, LC-XG250L* owner manual Moving the Projector, Transporting the Projector

Page 6

Moving the Projector

Use the hand grip when moving the projector.

Replace the lens cap and retract the adjustable feet to prevent damage to the lens and cabinet when carrying.

When the projector is not in use for an extended period, put it into a suitable case to protect the projector.

CAUTION IN CARRYING OR

TRANSPORTING THE PROJECTOR

Do not drop or bump the projector, otherwise damages or malfunctions may result.

When carrying the projector, use a suitable carrying case.

Do not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer.

Do not put the projector in a case before it is cooled enough.

Cautions in Handling the Projector

Do not hold the lens when lifting or moving the projector.

Doing so may cause damage to the lens and the projector.

Care must be taken when handling the projector; do not drop, bump, subject it to strong forces, or put other things on the cabinet.

Do not hold the lens and the peripheral part.

CAUTION

This projector has a motorized lens. Please note the followings when using the projector.

● Do not touch the lens while it is moving as this could cause injury to the fingers.

● Never allow children to touch the lens.

- 6 -

Image 6
Contents Quick Reference Guide To the Owner Safety Instructions Voor de klanten in NederlandAir Circulation Top ControlInstalling the Projector in Proper Directions Positioning PrecautionsMoving the Projector Transporting the ProjectorInfrared Remote Receiver Front Adjustable Feet 0Exhaust VentFront Back Bottom Kensington Security SlotRear Terminal Front. Reset button 4Infrared Remote Receiver BackTop Control Remote Control STAND-BY button Turn the projector off Wired Remote jack3MENU button Remote Control Battery Installation Remote Control Receivers and Operating RangeAdjustable Feet Lens Installation Attaching the lens to the projectorPositioning the Projector for LC-XG300/XG250 Moving the LensConnecting the AC Power Cord Projector side AC Outlet sideConnecting to a Computer Digital and Analog RGB Cables used for connectionConnecting to Video Equipment Video, S-Video Audio OUT stereoConnecting to Video Equipment Component and RGB Scart Turning On the Projector Selected Input Source and Lamp ControlPIN Code Input Dialog Box Turning Off the Projector How to Operate the On-Screen Menu Remote ControlOn-Screen Menu