Eiki LC-XM4 Connecting Projector, Terminals of Projector, USB Connector Series B, Audio Computer

CONNECTING PROJECTOR

TERMINALS OF PROJECTOR

This projector has input and output terminals on its side for connecting computers and video equipment. Refer to figures on pages 11 to 13 and connect properly.

USB CONNECTOR (Series B) RESET BUTTON

VIDEO INPUT JACKS

When controlling a computer with the Wireless Remote Control Unit that is optionally supplied, connect USB port of the computer to this connector. The Remote Control Unit supplied with the projector can not control a computer. Consult your dealer for details. (Refer to P12.)

This projector uses a micro processor to control this unit, and occasionally, this micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart the unit. Do not use RESET function excessively.

Connect the composite video output from video equipment to VIDEO/Y jack or connect the component video outputs to VIDEO/Y, Pb/Cb and Pr/Cr jacks. (Refer to P13.)

S-VIDEO INPUT JACK

Connect the S-VIDEO output from video equipment to this jack. (Refer to P13.)

	VIDEO
RESET	Y – Pb / Cb – Pr / Cr
USB
COMPUTER	CONTROL PORT S–VIDEO

AUDIO IN

AV

COMPUTER IN

AUDIO OUT

CONTROL PORT CONNECTOR

When controlling a computer with the Wireless Remote Control Unit that is optionally supplied, connect the mouse port of the computer to this connector. The Remote Control Unit supplied with the projector can not control a computer. Consult your dealer for details.(Refer to P12.)

COMPUTER INPUT

TERMINAL (ANALOG)

Connect the computer output to this jack.

(Refer to P12.)

COMPUTER AUDIO

INPUT JACK

Connect the audio output (stereo) from computer to this jack. (Refer to P12.)

AUDIO OUTPUT JACK	AUDIO INPUT JACK
Connect an external	Connect the audio output
audio amplifier to this	from video equipment to
jack.	this jack.
(Refer to P12, 13.)	(Refer to P13.)

11