Eiki LC-XB41 Maintenance and Cleaning Cleaning the Filter, Resetting the Filter Counter

Page 52

Maintenance and Cleaning

Cleaning the Filter

Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. If a “Filter warning” icon appears on the screen, clean the filter immediately. Clean the filter by following the steps below.

1

Turn off the projector, and unplug the AC power cord

 

from the AC outlet.

2

Turn the projector over and remove the filter by pulling

 

the latches upward.

3

Gently clean the filter by using a brush or rinse it

 

softly.

4

When rinsing the filter, dry it well. Replace the filter

 

properly. Make sure that the filter is fully inserted to

the projector.

CAUTION

Do not operate the projector with the filter removed. Dust may accumulate on the optical elements degrading picture quality.

Do not put anything into the air vents. Doing so may result in malfunction of the projector.

RECOMMENDATION

We recommend avoiding dusty/smoky environments when you operate the projector. Usage in these environments may cause poor image quality.

When using the projector under dusty or smoky conditions, dust may accumulate on a lens, LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning.

Filter

Pull up and remove.

Note:

•When reinserting this filter, be sure that the slit part is facing the outer side.

Resetting the Filter Counter

Be sure to reset the Filter counter after cleaning or replacing the filter.

1

Press the MENU button to display the On-Screen

Filter counter

 

Menu. Use the Point 78 buttons to move the red

 

 

frame pointer to the Setting Menu icon.

 

2

Use the Point ed buttons to move the red frame

 

 

pointer to Filter counter and then press the SELECT

 

 

button. A dialog box appears showing the total

 

 

accumulated time of the filter use, a timer setting

 

 

option, and the reset option. Select Reset and the

 

 

“Filter counter Reset?” appears. Select [Yes] to

 

 

continue.

 

3

Another confirmation dialog box appears, select [Yes]

 

 

to reset the Filter counter.

 

Select Reset and the “Filter counter Reset?” appears.

Select [Yes], then another confirmation box appears.

Select [Yes] again to reset the Filter counter.

52

Image 52
Contents Model LC-XB41 Features and Design Compact Design Multilanguage Menu DisplayTable of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandSafety Instructions Air Circulation Moving the ProjectorPositioning Precautions AC Power Cord for the United Kingdom AC Power Cord for the United States and CanadaCompliance Part Names and Functions FrontBack BottomPart Names and Functions Rear Terminal Part Names and Functions Top Control Remote Control Part Names and FunctionsRemote Control Battery Installation Remote Control Operating RangeAdjustable Feet InstallationPositioning the Projector Installation Connecting to a Computer Cables used for connectionInstallation Connecting to Video Equipment Installation Connecting to Component Video Equipment Installation Connecting the AC Power Cord Projector side AC outlet sideBasic Operation Turning On the ProjectorSelected Input Source and Lamp Control PIN Code Input Dialog BoxBasic Operation Turning Off the Projector Basic Operation How to Operate the On-Screen Menu Remote ControlTop Control On-Screen MenuMenu Bar Basic OperationZoom and Focus Adjustment Sound AdjustmentVolume MuteRemote Control Operation Computer / Video buttonAuto PC button Computer Input Input Source SelectionInput Menu Source Select MenuComputer Input Computer System SelectionSelecting Computer System Manually Auto PC Adjustment To store adjustment parametersPC Adjust Menu Menu Operation Auto PC AdjManual PC Adjustment To clear adjusted data parameters To store adjusted dataImage Mode Selection Image Adjustment Screen Size Adjustment Digital zoom + CustomDigital zoom Video Input Input Source Selection Video, S-VideoInput Source Selection Component, RGB Scart 21-pin Video InputTop Control ComponentVideo System Selection AutoAV System Menu Video or S-Video AV System Menu ComponentCinema Image Remote ControlImage1-4 Color TintNoise reduction ProgressiveVideo Input Screen Size Adjustment Custom Screen MenuSetting SettingSetting Logo Logo and Logo PIN code lock settingsLogo select CaptureChange the Logo PIN code lock setting Enter a Logo PIN codeChange the Logo PIN code Logo PIN code lockRear CeilingInput search On start Power managementLamp control To change the code for the remote control Security Key lock and PIN code lock settingsTo change the code for the projector Key lockChange the PIN code lock setting Enter a PIN codeChange the PIN code PIN code lockFan Fan Control Setting FanFan control Lamp counterFactory default Factory defaultFilter counter Maintenance and Cleaning Then check the matters belowMaintenance and Cleaning Cleaning the Filter Resetting the Filter CounterCleaning the Projector Cabinet Cleaning the Projection LensSlide Shutter Reset the lamp counter Maintenance and Cleaning Lamp ReplacementService Parts No 333 Lamp Handling Precautions Maintenance and Cleaning Resetting the Lamp CounterTroubleshooting AppendixAppendix Some displays are not seen during the operationMenu Tree SoundVideo Input Setting Indicators and Projector Condition Projector ConditionCompatible Computer Specifications ON-SCREEN ResolutionTechnical Specifications Accessories Optional PartsConfigurations of Terminals DimensionsTerminal Analog RGB Mini D-sub 15 pin Terminal Mini DIN 8-PINPIN Code Number Memo Logo PIN Code Lock NoCanada

LC-XB41 specifications

The Eiki LC-XB41 is an advanced projector designed to meet the diverse needs of professional environments, educational institutions, and corporate settings. With its impressive array of features, this model delivers exceptional performance and versatility, making it a compelling choice for users seeking quality in their visual presentations.

At the heart of the Eiki LC-XB41 is its powerful 3LCD technology. This method of projection ensures bright, vibrant colors and crisp images, regardless of the ambient lighting conditions. With a high brightness rating of 5200 lumens, the LC-XB41 excels in both dimly lit rooms and well-lit spaces, enhancing the visibility of presentations and videos. The projector offers a resolution of XGA (1024x768), which is ideal for displaying detailed graphics, text, and videos with clarity.

One of the standout features of the Eiki LC-XB41 is its versatile connectivity options. It comes equipped with multiple HDMI ports, VGA inputs, and component video connectors, ensuring compatibility with a wide range of devices, including laptops, Blu-ray players, and cameras. This flexibility allows users to easily switch between different sources during presentations without the need for additional adapters.

The LC-XB41 also incorporates advanced lens shift and digital keystone correction technology, allowing users to adjust the image placement easily. This feature enables a perfect alignment of the projected image, even when the projector is not positioned directly in front of the screen, which is particularly useful in unconventional setups or tight spaces.

In terms of energy efficiency, the Eiki LC-XB41 is designed with a long-lasting lamp that can deliver up to 4000 hours of usage in standard mode and even longer in eco mode. This longevity not only reduces the total cost of ownership but also minimizes the environmental impact, making it a sustainable choice for users who rely on consistent performance.

Additionally, the projector’s compact design and lightweight construction make it portable, allowing easy transport to various sites. The fan noise is notably low, ensuring that audience attention is focused on the presentation rather than distracting sounds.

Overall, the Eiki LC-XB41 combines high brightness, excellent color accuracy, versatile connectivity, and user-friendly features to provide a reliable projection solution for any setting. Whether in a classroom, boardroom, or conference hall, the Eiki LC-XB41 stands out as a top-tier choice for engaging and impactful presentations.