Eiki LC-XB41 owner manual Maintenance and Cleaning Lamp Replacement, Reset the lamp counter

Page 54
Connect the AC power cord to the projector and turn on the projector.
Replace the lamp with a new one and secure the two
Turn off the projector and unplug the AC power cord. Let the projector cool for at least 45 minutes.
Remove the screw and open the lamp cover.
Remove the two (2) screws that secure the lamp. Lift the lamp out of the projector by using the handle.

Maintenance and Cleaning

Lamp Replacement

When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is depending on the lamp mode.

WARNING:

TURN OFF THE UV LAMP BEFORE

OPENING THE LAMP COVER

Top Control

LAMP REPLACE indicator

Lamp replacement icon

Note:

•The Lamp replacement icon will not appear when the Display function is set to “Off” (p.42), during “Freeze” (p.24), or “No show” (p.25).

CAUTION

Allow a projector to cool for at least 45 minutes before you open the Lamp cover. The inside of the projector can become very hot.

CAUTION

For continued safety, replace with a lamp of the same type. Do not drop a lamp or touch a glass bulb! The glass can shatter and may cause injury.

Follow these steps to replace the lamp.

1

2

3

4 (2) screws. Make sure that the lamp is set properly. Close the lamp cover and secure the screw.

Press here and pull upward.

Lamp Cover

Screw

Screw

Handle

Screw

5

6 Reset the lamp counter.

See “Resetting the Lamp Counter” on the next page.

Lamp

ORDER REPLACEMENT LAMP

Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer.

Model No. of your projector

: LC-XB41

Replacement Lamp Type No.

: POA-LMP111

 

 

(Service Parts No. 610 333 9740)

54

Image 54
Contents Model LC-XB41 Features and Design Compact Design Multilanguage Menu DisplayTable of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandSafety Instructions Air Circulation Moving the ProjectorPositioning Precautions AC Power Cord for the United States and Canada AC Power Cord for the United KingdomCompliance Back Part Names and FunctionsFront BottomPart Names and Functions Rear Terminal Part Names and Functions Top Control Remote Control Part Names and FunctionsRemote Control Battery Installation Remote Control Operating RangeInstallation Adjustable FeetPositioning the Projector Installation Connecting to a Computer Cables used for connectionInstallation Connecting to Video Equipment Installation Connecting to Component Video Equipment Installation Connecting the AC Power Cord Projector side AC outlet sideSelected Input Source and Lamp Control Basic OperationTurning On the Projector PIN Code Input Dialog BoxBasic Operation Turning Off the Projector Top Control Basic Operation How to Operate the On-Screen MenuRemote Control On-Screen MenuMenu Bar Basic OperationVolume Zoom and Focus AdjustmentSound Adjustment MuteRemote Control Operation Computer / Video buttonAuto PC button Input Menu Computer InputInput Source Selection Source Select MenuComputer System Selection Computer InputSelecting Computer System Manually PC Adjust Menu Auto PC AdjustmentTo store adjustment parameters Menu Operation Auto PC AdjManual PC Adjustment To clear adjusted data parameters To store adjusted dataImage Mode Selection Image Adjustment Screen Size Adjustment Custom Digital zoom +Digital zoom Video Input Input Source Selection Video, S-VideoTop Control Input Source Selection Component, RGB Scart 21-pinVideo Input ComponentAV System Menu Video or S-Video Video System SelectionAuto AV System Menu ComponentImage Remote Control CinemaImage1-4 Color TintNoise reduction ProgressiveVideo Input Screen Size Adjustment Custom Screen MenuSetting SettingLogo select SettingLogo Logo and Logo PIN code lock settings CaptureChange the Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code Logo PIN code lockCeiling RearInput search Power management On startLamp control To change the code for the projector To change the code for the remote controlSecurity Key lock and PIN code lock settings Key lockChange the PIN code Change the PIN code lock settingEnter a PIN code PIN code lockFan control Fan Fan Control SettingFan Lamp counterFactory default Factory defaultFilter counter Maintenance and Cleaning Then check the matters belowMaintenance and Cleaning Cleaning the Filter Resetting the Filter CounterCleaning the Projection Lens Cleaning the Projector CabinetSlide Shutter Maintenance and Cleaning Lamp Replacement Reset the lamp counterService Parts No 333 Lamp Handling Precautions Maintenance and Cleaning Resetting the Lamp CounterTroubleshooting AppendixAppendix Some displays are not seen during the operationMenu Tree SoundVideo Input Setting Indicators and Projector Condition Projector ConditionCompatible Computer Specifications ON-SCREEN ResolutionTechnical Specifications Accessories Optional PartsTerminal Analog RGB Mini D-sub 15 pin Configurations of TerminalsDimensions Terminal Mini DIN 8-PINPIN Code Number Memo Logo PIN Code Lock NoCanada

LC-XB41 specifications

The Eiki LC-XB41 is an advanced projector designed to meet the diverse needs of professional environments, educational institutions, and corporate settings. With its impressive array of features, this model delivers exceptional performance and versatility, making it a compelling choice for users seeking quality in their visual presentations.

At the heart of the Eiki LC-XB41 is its powerful 3LCD technology. This method of projection ensures bright, vibrant colors and crisp images, regardless of the ambient lighting conditions. With a high brightness rating of 5200 lumens, the LC-XB41 excels in both dimly lit rooms and well-lit spaces, enhancing the visibility of presentations and videos. The projector offers a resolution of XGA (1024x768), which is ideal for displaying detailed graphics, text, and videos with clarity.

One of the standout features of the Eiki LC-XB41 is its versatile connectivity options. It comes equipped with multiple HDMI ports, VGA inputs, and component video connectors, ensuring compatibility with a wide range of devices, including laptops, Blu-ray players, and cameras. This flexibility allows users to easily switch between different sources during presentations without the need for additional adapters.

The LC-XB41 also incorporates advanced lens shift and digital keystone correction technology, allowing users to adjust the image placement easily. This feature enables a perfect alignment of the projected image, even when the projector is not positioned directly in front of the screen, which is particularly useful in unconventional setups or tight spaces.

In terms of energy efficiency, the Eiki LC-XB41 is designed with a long-lasting lamp that can deliver up to 4000 hours of usage in standard mode and even longer in eco mode. This longevity not only reduces the total cost of ownership but also minimizes the environmental impact, making it a sustainable choice for users who rely on consistent performance.

Additionally, the projector’s compact design and lightweight construction make it portable, allowing easy transport to various sites. The fan noise is notably low, ensuring that audience attention is focused on the presentation rather than distracting sounds.

Overall, the Eiki LC-XB41 combines high brightness, excellent color accuracy, versatile connectivity, and user-friendly features to provide a reliable projection solution for any setting. Whether in a classroom, boardroom, or conference hall, the Eiki LC-XB41 stands out as a top-tier choice for engaging and impactful presentations.