Eiki LC-XB28 Enter a PIN code, To Change the PIN code lock setting, To Change the PIN Code

Setting

PIN code lock

This function prevents the projector from being operated by an unauthorized person and provides the following settings for security options.

Off	the projector is not locked with the PIN code.
On1	requires to enter the PIN code every time
	turning on the projector.
On2	requires to enter the PIN code to operate the
	projector once the power cord is disconnected;
	as long as the AC power cord is connected, the
	projector can be operated without the PIN
	code.

To change the PIN code lock setting or the PIN code (the four-digit number), you are required to enter the PIN code. "1234" is set as the initial PIN code at the factory.

Enter a PIN code

Select a number by pressing the Point 7 8 buttons and fix the number with the SELECT button. The number will change to "✳". If you fixed an incorrect number, move the pointer to "Set" or "Clear" once by pressing the Point

dbutton, then return to "PIN code". Enter the correct number again.

Repeat this step to complete entering a four-digit number.

When the four-digit number is fixed, the pointer will automatically move to "Set". Press the SELECT button so that you can change the following PIN code lock settings.

If you entered an incorrect PIN code, "PIN code" and the number (✳✳✳✳) will turn red and disappear. Enter a correct PIN code all over again.

To Change the PIN code lock setting

Select Off, On1, or On2 with the Point 7 8 buttons and then "Quit" with the Point d button and press the SELECT button to close the dialog box.

To Change the PIN Code

The PIN code can be changed to your desired four-digit number.

Select "PIN code change" with the Point d button, and press the SELECT button. The New PIN code input dialog box will appear.

Select a number with the Point 7 8 buttons and fix the number with the SELECT button. Repeat it to complete entering a four-digit number. When the four-digit number is fixed, the pointer will automatically move to "Set". Then press the SELECT button.

CAUTION:

WHEN YOU HAVE CHANGED PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON PAGE 59, AND KEEP IT SECURELY.

SHOULD THE PIN CODE BE LOST OR FORGOTTEN, THE PROJECTOR CAN NO LONGER BE OPERATED.

PIN code lock

When the projector is locked with the PIN code, the PIN code lock mark appears on the menu bar.

Enter a PIN code

Pointer

Quit

The input numbers change to “✳” for security.

When the pointer automatically

move to "Set", press the SELECT button.

Change the PIN code lock setting

Select a desired setting with the Point 7 8 buttons.

Change the PIN code

Select PIN code change and press

the SELECT button. The New PIN code input dialog box will appear.

The input numbers are being displayed for confirmation.

Setting

43