Computer Input
Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA or SXGA with its
✔Note:
The projector may display one of the following messages.
Auto | When the projector cannot recognize connected | PC System Menu |
| signal conforming to PC Systems provided in |
|
|
| |
| this projector, Auto PC Adjustment function |
|
| works to display proper images and the |
|
| message “Auto” is displayed on the PC System |
|
| Menu icon. When the image is not projected |
|
| properly, manual adjustment is required. |
|
| (p27, 28 ) |
|
-----There is no signal input from computer. Check the connection of your computer and the projector. ( " Troubleshooting" p50 )
Mode 1 User preset system manually adjusted in PC
Adjust menu. Adjustment data can be stored in
Mode 1 - 5. ( p27, 28 )
The Auto PC Adjustment function operates to adjust the projector.
SVGA 1 PC Systems provided in the projector. The projector chooses a proper system and displays it.
*Mode 1 and SVGA 1 are examples.
PC System Menu
Selecting Computer System Manually
PC system can also be selected manually.
1 | Press the MENU button | to display the |
| Menu. Press the Point 7 | 8 buttons to move the red |
| frame pointer to the PC System Menu icon. | |
2 | Press the Point d button to move the red arrow | |
| pointer to the system that you want to set, and then |
press the SELECT button.
The PC System Menu icon Selected system is displayed.
The systems on this dialog box can be selected.
Custom Mode (1~5) set in the PC Adjust Menu. (p27, 28)
Computer Input
25