Eiki LC-X80 owner manual Connecting the AC Power Cord, For the U..K

Page 22

Installation

Connecting the AC Power Cord

This projector uses nominal input voltages of 100–120 V or 200– 240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.

If you are not sure of the type of power being supplied, consult your authorized dealer or service station.

Connect the projector with all peripheral equipment before turning on the projector.

CAUTION

For safety, unplug the AC power cord when the projector is not in use. When the projector is connected to an outlet with AC power cord, it is in stand-by mode and consumes a little electric power.

Connect the AC power cord (supplied) to the projector.

The AC outlet must be near this equipment and must be easily accessible.

NOTE ON THE POWER CORD

AC power cord must meet the requirements of the country where you use the projector.

Confirm the AC plug type with the chart below and proper AC power cord must be used.

If the supplied AC power cord does not match your AC outlet, contact your sales dealer.

Projector side

 

AC Outlet side

 

 

For the U..S..A.. and Canada

For Continental Europe

For the U..K..

 

Ground

 

 

To POWER CORD

 

 

 

CONNECTOR on your

To the AC Outlet.

To the AC Outlet.

To the AC Outlet.

projector.

(120 V AC)

(200–240 V AC)

(200–240 V AC)

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Model LC-X80 Features and Design Table of Contents To The Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandAir Circulation Top PanelInstalling the Projector in Proper Directions Positioning PrecautionsMoving the Projector Transporting the ProjectorCompliance AC Power Cord RequirementFederal Communications Commission Notice Back Part Names and FunctionsFront q BottomRear Terminal Side Control and Indicators Side Control Indicators on the top panelRemote Control 3MENU button 4P-TIMER button@0FOCUS buttons Adjust the focus p.28 @1NO Show button 5D..ZOOM buttonRemote Control Receivers and Operating Range Remote Control Battery InstallationWired Remote Control Transmitter Remote Control Code Installation Adjustable FeetLens Installation Removing the lensAttaching the lens to the projector Connecting to a Computer Digital and Analog RGB USB R H/V Digital Analog Monitor OUT Control PortConnecting to Video Equipment Video, S-Video Monitor Out Signal TableFor the U..K Connecting the AC Power CordFor the U..S..A.. and Canada For Continental Europe Turning On the Projector What is PIN code?Basic Operation Enter a PIN codeTurning Off the Projector How to Operate the On-Screen Menu For Computer Source Menu BarFor Video Source Lens Operation Operating with Projector ControlLens button Point buttons Operating with Remote Control No Show button Timer buttonFilter button Mouse Pointer buttonPointer Wireless Mouse OperationPointer Function Mouse Pointer buttonInput Remote Control OperationInput Selection Side Control OperationInput Menu Computer Input Source SelectionMenu Operation Source Select MenuVideo Input Source Selection Video Pb/Cb, Pr/CrAutomatic Multi-Scan System Computer InputComputer System Selection Selecting Computer System ManuallyDirect Operation Auto PC AdjustmentPC Adjust Menu Auto PC adjManual PC Adjustment To store the adjusted data ResetMode free StoreReal Image Level SelectionStandard ImageScreen Size Adjustment Screen MenuRear KeystoneCeiling Digital zoom +Video Input Video System SelectionCinema Provide the image at the normal video aspect ratio Keystone Pointer Mode Image AdjustmentImage Adjust Menu Picture ImageColor Palette Color MMenu DELSharpness White balance Red/Green/BlueOffset Red/Green/Blue GammaSetting SettingLogo select LogoLogo Capture Enter a Logo PIN code Change the Logo PIN code lock settingChange the Logo PIN code RC sensor Power management Wireless Mouse modeProjector mode USBSecurity Security Key lockPIN code lock Key lock PIN code lockChange the PIN Code Change the PIN Code Lock settingChange the PIN code lock setting Enter a PIN codeFilter counter Factory defaultTest pattern Maintenance and Care Filter InstructionsMaintenance and Care Filter counter Lamp Replace indicator Lamp ReplacementReset the Lamp counter p.60 Resetting the Lamp Counter Model No.. of your projector LC-X80 Replacement Lamp Type NoLamp Handling Precautions Cleaning the Projection Lens Cleaning the Projector CabinetLamp indicator lights on and other four indicators blink Then check the matters belowProblem Try These Solutions TroubleshootingAppendix Not work Remote control doesWireless mouse Function does notComputer Input/Video Input Image AdjustMenu Tree InformationScreen PC AdjustSystem Image Select SystemSetting USBIndicators and Projector Condition Projector ConditionAppendix Indicators Compatible Computer Specifications Resolution59.940 Power Panel ResolutionSignal Compatibility Remote ControlOptional Parts Lens ReplacementTo the sales and service engineers PJ Link NoticeControl Port Connector D-sub 9 pin Configurations of TerminalsANALOG/ Monitor OUT Mini D-sub 15 pin PIN Code Lock No PIN Code Number MemoLogo PIN Code Lock No Dimensions Operation FormatExample Functional Execution Command Table Status Read Command TableCanada Deutschland & ÖsterreichChina Eastern Europe

LC-X80 specifications

The Eiki LC-X80 is a cutting-edge LCD projector designed to deliver exceptional performance in various presentation environments. Offering high brightness and contrast ratios, this projector is ideal for educational institutions, corporate meetings, and events where clear visuals are paramount.

At the heart of the Eiki LC-X80’s functionality is its advanced LCD technology. With a brightness of 5,000 ANSI lumens, the projector ensures vivid, colorful visuals even in well-lit rooms. Coupled with a contrast ratio of 3,000:1, the projector produces deeper blacks and more vibrant colors, enhancing the overall viewing experience. This level of performance makes it suitable for everything from detailed graphs and charts to dynamic video content.

One standout feature of the Eiki LC-X80 is its native XGA resolution (1024 x 768), which enables crystal-clear image quality for both text and images. Furthermore, the projector supports multiple resolutions including WXGA and SD, providing versatility for a variety of media formats. The Eiki LC-X80 also boasts a robust lens, providing a range of installation options, including horizontal and vertical keystone correction, which allows for easy adjustments and flexible setups without compromising image quality.

In terms of connectivity, the Eiki LC-X80 offers a wealth of input options. It comes equipped with multiple HDMI ports, VGA inputs, and composite video inputs, ensuring compatibility with a wide array of devices. Additionally, USB support allows for easy content sharing from flash drives and other peripherals.

For users concerned about maintenance, the Eiki LC-X80 is designed with a long-lasting lamp life of up to 5,000 hours in standard mode and up to 10,000 hours in eco mode. This feature significantly reduces the frequency of lamp replacements, lowering overall operating costs. The projector also includes a dust-proof design, which helps to maintain optimal performance over time.

Another advantage of the Eiki LC-X80 is its quiet operation, producing only 28 dB in eco mode. This allows for a less distracting environment during presentations, enabling speakers to maintain the audience’s attention more effectively.

Overall, the Eiki LC-X80 is a versatile, high-performance projector that meets the demands of modern presentations. With its advanced features, excellent connectivity options, and reliability, it stands out as an exceptional choice for organizations seeking a dependable and powerful projection solution.
Top Page Image Contents