Eiki LC-X80 owner manual Format, Operation, Example

Page 78

Appendix

Serial Control Interface

This projector provides a function to control and monitor the projector's operations by using the RS-232C serial port.

Format

The command is sent from PC to the projector with the format below;

'C' [Command] 'CR'

Command: two charactors (refer to the command table on next page.

The projector decodes the command and returns the 'ACK' with the format below;

'ACK' 'CR'

Operation

1

Connect a RS-232C serial cross cable to CONTROL

PORT on the projector and serial port on the PC.

 

(See p.20)

 

 

2

Launch a communication software provided with PC

 

and setup the communication condition as follows:

 

 

 

 

 

 

 

Baud rate

: 9600 / 19200 bps

 

 

 

Parity check

: none

 

 

 

Stop bit

: 1

 

 

 

Flow control

: none

 

 

 

Data bit

: 8

 

 

 

 

 

 

Note:

The default of the baud rate is set to 19200 bps. If an error occurs in the communication, change the serial port and the communication speed (baud rate).

3

Type the command for controlling the projector and

 

then enter the "Enter" key.

Example

When you want to change the input to INPUT 2, Type 'C' '0' '6' 'Enter'.

Note:

Enter with ASCII 64-byte capital characters and one- byte characters.

78

Image 78
Contents Model LC-X80 Features and Design Table of Contents To The Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandAir Circulation Top PanelInstalling the Projector in Proper Directions Positioning PrecautionsMoving the Projector Transporting the ProjectorAC Power Cord Requirement ComplianceFederal Communications Commission Notice Back Part Names and FunctionsFront q BottomRear Terminal Side Control and Indicators Side Control Indicators on the top panelRemote Control 3MENU button 4P-TIMER button@0FOCUS buttons Adjust the focus p.28 @1NO Show button 5D..ZOOM buttonRemote Control Battery Installation Remote Control Receivers and Operating RangeWired Remote Control Transmitter Remote Control Code Installation Adjustable FeetLens Installation Removing the lensAttaching the lens to the projector Connecting to a Computer Digital and Analog RGB USB R H/V Digital Analog Monitor OUT Control PortConnecting to Video Equipment Video, S-Video Monitor Out Signal TableConnecting the AC Power Cord For the U..KFor the U..S..A.. and Canada For Continental Europe Turning On the Projector What is PIN code?Basic Operation Enter a PIN codeTurning Off the Projector How to Operate the On-Screen Menu Menu Bar For Computer SourceFor Video Source Operating with Projector Control Lens OperationLens button Point buttons Operating with Remote Control No Show button Timer buttonFilter button Mouse Pointer buttonPointer Wireless Mouse OperationPointer Function Mouse Pointer buttonInput Remote Control OperationInput Selection Side Control OperationInput Menu Computer Input Source SelectionMenu Operation Source Select MenuVideo Input Source Selection Video Pb/Cb, Pr/CrAutomatic Multi-Scan System Computer InputComputer System Selection Selecting Computer System ManuallyDirect Operation Auto PC AdjustmentPC Adjust Menu Auto PC adjManual PC Adjustment To store the adjusted data ResetMode free StoreReal Image Level SelectionStandard ImageScreen Size Adjustment Screen MenuRear KeystoneCeiling Digital zoom +Video Input Video System SelectionCinema Provide the image at the normal video aspect ratio Keystone Pointer Mode Image AdjustmentImage Adjust Menu Picture ImageColor Palette Color MMenu DELSharpness White balance Red/Green/BlueOffset Red/Green/Blue GammaSetting SettingLogo Logo selectLogo Capture Change the Logo PIN code lock setting Enter a Logo PIN codeChange the Logo PIN code RC sensor Power management Wireless Mouse modeProjector mode USBSecurity Security Key lockPIN code lock Key lock PIN code lockChange the PIN Code Change the PIN Code Lock settingChange the PIN code lock setting Enter a PIN codeFactory default Filter counterTest pattern Maintenance and Care Filter InstructionsMaintenance and Care Filter counter Lamp Replacement Lamp Replace indicatorReset the Lamp counter p.60 Resetting the Lamp Counter Model No.. of your projector LC-X80 Replacement Lamp Type NoLamp Handling Precautions Cleaning the Projection Lens Cleaning the Projector CabinetLamp indicator lights on and other four indicators blink Then check the matters belowTroubleshooting Problem Try These SolutionsAppendix Not work Remote control doesWireless mouse Function does notComputer Input/Video Input Image AdjustMenu Tree InformationScreen PC AdjustSystem Image Select SystemSetting USBIndicators and Projector Condition Projector ConditionAppendix Indicators Compatible Computer Specifications Resolution59.940 Power Panel ResolutionSignal Compatibility Remote ControlOptional Parts Lens ReplacementTo the sales and service engineers PJ Link NoticeConfigurations of Terminals Control Port Connector D-sub 9 pinANALOG/ Monitor OUT Mini D-sub 15 pin PIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Dimensions Format OperationExample Functional Execution Command Table Status Read Command TableCanada Deutschland & ÖsterreichChina Eastern Europe

LC-X80 specifications

The Eiki LC-X80 is a cutting-edge LCD projector designed to deliver exceptional performance in various presentation environments. Offering high brightness and contrast ratios, this projector is ideal for educational institutions, corporate meetings, and events where clear visuals are paramount.

At the heart of the Eiki LC-X80’s functionality is its advanced LCD technology. With a brightness of 5,000 ANSI lumens, the projector ensures vivid, colorful visuals even in well-lit rooms. Coupled with a contrast ratio of 3,000:1, the projector produces deeper blacks and more vibrant colors, enhancing the overall viewing experience. This level of performance makes it suitable for everything from detailed graphs and charts to dynamic video content.

One standout feature of the Eiki LC-X80 is its native XGA resolution (1024 x 768), which enables crystal-clear image quality for both text and images. Furthermore, the projector supports multiple resolutions including WXGA and SD, providing versatility for a variety of media formats. The Eiki LC-X80 also boasts a robust lens, providing a range of installation options, including horizontal and vertical keystone correction, which allows for easy adjustments and flexible setups without compromising image quality.

In terms of connectivity, the Eiki LC-X80 offers a wealth of input options. It comes equipped with multiple HDMI ports, VGA inputs, and composite video inputs, ensuring compatibility with a wide array of devices. Additionally, USB support allows for easy content sharing from flash drives and other peripherals.

For users concerned about maintenance, the Eiki LC-X80 is designed with a long-lasting lamp life of up to 5,000 hours in standard mode and up to 10,000 hours in eco mode. This feature significantly reduces the frequency of lamp replacements, lowering overall operating costs. The projector also includes a dust-proof design, which helps to maintain optimal performance over time.

Another advantage of the Eiki LC-X80 is its quiet operation, producing only 28 dB in eco mode. This allows for a less distracting environment during presentations, enabling speakers to maintain the audience’s attention more effectively.

Overall, the Eiki LC-X80 is a versatile, high-performance projector that meets the demands of modern presentations. With its advanced features, excellent connectivity options, and reliability, it stands out as an exceptional choice for organizations seeking a dependable and powerful projection solution.