Eiki LC-X85 owner manual Screen Size Adjustment, Screen Menu

Computer Input

Screen Size Adjustment

Select the desired screen size that conforms to the input signal source.

1	Press the MENU button to display the On-Screen Menu. Use
	the Point 7 8 buttons to move the red frame pointer to the
	Screen Menu icon.
2	Use the Point ed buttons to move the red frame pointer to
	the desired function and then press the SELECT button.

Normal

Provide the image at the normal computer aspect ratio of 4:3.

True

Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector enters to

the panning mode automatically. Use the Point ed7 8 buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear.

Wide

Provide the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used to provide the squeezed video signal at 16:9.

Full screen

Provides the full screen image.

Custom

Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the “Custom” is displayed on the screen for a few seconds. To display the Aspect dialog box, press the SELECT button at Custom again and then the Aspect dialog box appears.

Scale H/V	Adjust the Horizontal/Vertical screen scale.
H&V	When set to “On,” the aspect ratio is fixed.
	The “Scale V” appears dimmed and becomes
	unavailable. Adjust “Scale H,” then the screen
	scale is automatically modified based on the
	aspect ratio.
Position H/V	Adjust the Horizontal/Vertical screen position.
Common	Save the adjusted scale to all the inputs.
	Press the SELECT button at Common to
	display a confirmation box. To save the scale,
	press the SELECT button at “Yes.” When
	Custom is selected, the saved scale is used.
Reset	Reset the all adjusted values. Press the
	SELECT button at Reset to display a
	confirmation box. To reset, press the SELECT
	button at “Yes.”

SCREEN MENU

Screen Menu icon

Move the red frame pointer to the desired function and press the SELECT button.

✔Note:

•The projector cannot display any resolution higher than 1920 x 1200. If your computer’s screen resolution is higher than 1920 x 1200, lower the resolution before connecting the projector.

•The image data other than XGA (1024 x 768) is modified to fit the screen size in initial mode.

•True, Full screen, and Digital zoom +/– cannot be selected when no signal is detected in the PC System Menu. (p.38)

Press the SELECT button at Common or

Reset, to display a confirmation box.

✔Note:

•When no signal is detected, “Normal” is set automatically and the Aspect dialog box disappears.

•The adjustable range for Scale H/V and Position H/V is limited depending on the input signal.

43