Picture Image
White balance (Red/Green/Blue)
Press the Point 7 button to lighten red/green/blue tone; press the Point 8 button to deepen red/green/blue tone (from 0 to 63).
Offset (Red/Green/Blue)
Press the Point 7 button to lighten red/green/blue tone of the black
level of an image; press the Point 8 button to deepen red/green/ blue tone of the black level of an image (from 0 to 63).
Sharpness
Press the Point 7 button to decrease the sharpness of the image;
press the Point 8 button to increase the sharpness of the image (from 0 to 31).
Gamma
Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).
Noise reduction ]
Noise interference on the screen can be reduced. Press the Point
7 8 buttons to change the noise reduction mode. Off . . . . Noise reduction mode is “Off”
On . . . . Noise reduction mode is “On”
Progressive ]
An interlaced video signal can be displayed in progressive mode.
Press the Point 7 8 buttons to change the progressive scan mode. Off . . . . Progressive scan mode is “Off.”
On . . . . Progressive scan mode is “On.”
Film . . . For watching a film. With this function, the projector reproduces pictures faithful to the original film quality.
Reset
To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures.
Store
To store the adjusted data, move the red frame pointer to the Store icon and press the SELECT button. The Image Level Menu appears. Move the red arrow pointer to any of the Image 1 to 10 in which you want to set and press the SELECT button. A confirmation box appears and then select [Yes].
Quit
Exit the Image Adjust Menu.
✔Note:
•✽ Displayed only in Video Input.
•When the White balance Red, Green, or Blue is adjusted, the Color temp. level will change to “Adj.”
•Progressive cannot be selected when “480p,” “575p,” or “720p” is selected (p.45).
Press the SELECT button at this icon to display other items.
Press the SELECT button at this icon to display the previous items.
Press the Point 7 8 buttons to adjust the setting value.
Image Level Menu
Move the red frame pointer to an image item to be set and then press the SELECT button.
Store icon
Press the SELECT button at this icon to store the adjustment.
51