Eiki LC-XG210 service manual Condenser Lens adjustment, White b Moving of Slot B Moving of Slot D

Optical Adjustments

Condenser Lens adjustment

1 Turn the projector on by a state of without FPC cables.

2 Adjust the adjustment base of condenser lens ass’y to make color uniformity in white.

1)If the shading appears on the left or right of the screen as shown in Fig.2-1, loosen 2 screws A with the 2.0mm hex driv- er, and adjust the slot B to make color uniformity in white by using a slot screwdriver.

2)If the shading appears on the top or bottom of the screen as shown in Fig.2-2, loosen 2 screws C with the 2.0mm hex driv- er, and adjust the slot D to make color uniformity in white by using a slot screwdriver

3 Tighten screws A and C to fix the Condenser lens unit.

Note:

The relay lens adjustment must be carried out after completing this adjustment.

a White b

b

a

A

B

A

Fig.2-1

Moving of Slot B

x

White

y

C

x

C

y

D

Fig.2-2

Moving of Slot D

-21-