Eiki LC-X1000 Computer Input, Selecting Input Source, Selecting Computer System, Input Menu

COMPUTER INPUT

SELECTING INPUT SOURCE

DIRECT OPERATION

Select INPUT source by pressing INPUT button on Top Control or on Remote Control Unit.

If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below).

INPUT button

INPUT 1

INPUT 2

INPUT 3

	MENU OPERATION
1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT buttons to select Input and press SELECT
	button. Another dialog box INPUT SELECT Menu will appear.
		INPUT Menu icon
2	Press POINT DOWN button and a red-arrow icon will appear.
	Move arrow to INPUT source that you want to select, and then
	press SELECT button.

SELECTING COMPUTER SYSTEM

WHEN SELECT INPUT 1 (COMPUTER INPUT TERMINALS )

1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT button to move a red frame pointer to
	INPUT Menu icon.
2	Press POINT DOWN button to move a red arrow pointer to Input
	1 and then press SELECT button. Source Select Menu will
	appear.
3	Move a pointer to either Digital or Analog and then press
	SELECT button.
		When your computer is connected to COMPUTER
Digital
		INPUT (DIGITAL) terminal, select RGB (Digital).
		When your computer is connected to COMPUTER INPUT
Analog
		(ANALOG) terminal, select RGB (Analog).

INPUT MENU

INPUT Menu icon

Move a pointer (red arrow) to Input 1 and press SELECT button.

Input 1

Source Select Menu

Move a pointer to Digital or Analog and press SELECT button.

WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )

When connecting to computer output use 5 BNC INPUT JACKS on INPUT MENU projector, select a type of input source in SOURCE SELECT Menu.

1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT button to move a red frame pointer to
	INPUT Menu icon.
2	Press POINT DOWN button to move a red arrow pointer to Input
	2 and then press SELECT button. Source Select Menu will
	appear.
3	Press POINT DOWN button and a red-arrow icon will appear.
	Move arrow to "RGB", and then press SELECT button.

Input 2

INPUT Menu icon

Move a pointer (red arrow) to Input 2 and press SELECT button.

Source Select Menu

Move a pointer to RGB and press SELECT button.

22