Eiki LC-X1000 instruction manual TOP Controls and Indicators, Ready Indicator

BEFORE OPERATION

TOP CONTROLS AND INDICATORS

This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.

LAMP REPLACE INDICATOR	WARNING TEMP. INDICATOR			READY INDICATOR
Turns to yellow when	Flashes	red	when	Lights green when a
life of projection lamp	internal	projector		projector is ready to be
draws to an end. (P39)	temperature		is too	turned on.	And it
	high. (P38)			flashes green in Power
				Management	mode.
				(P36)

LAMP INDICATOR

Becomes dim when a projector is turned on. And bright when a projector is in stand-by mode.

MENU BUTTON

Used to open or close MENU operation. (P17, 18)

ZOOM BUTTON

Used to adjust zoom. (P20)

FOCUS BUTTON

Used to adjust focus. (P20)

LENS SHIFT BUTTON

Used to select LENS

SHIFT function. (P20)

POINT LEFT/RIGHT/UP/DOWN (VOLUME + / – ) BUTTONS

Used to select an item or adjust value in ON-SCREEN MENU. They are also used to pan image in DIGITAL ZOOM +/– mode. (P29)

POINT LEFT/RIGHT buttons are also used as VOLUME +/– buttons. POINT UP/DOWN buttons are also used as adjust Zoom, Focus and Lens Shift. (P20)

SELECT BUTTON

Used to execute item selected. It is also used to expand / compress image in DIGITAL ZOOM mode. (P29)

POWER ON–OFF BUTTON

Used to turn a projector on or off. (P19)

INPUT BUTTON

Used to select input source. (P22)

AUTO PC ADJ. BUTTON

Used to operate AUTO PC

Adjustment function. (P23)

IMAGE BUTTON

Used to select image level. (P27, 32)

16