MODE FREE
The Mode free function is provided to confirm or clear the parameter data produced by PC ADJUST.
1.Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2.Press the POINT LEFT/RIGHT BUTTON(s) to select PC ADJUST and press the SELECT (REAR CLICK) BUTTON. Another dialog box “Where to reserve” will appear.
3.Press the POINT DOWN BUTTON and a red arrow will appear.
4.Move the arrow to one of the “Modes” (Stored position) that you want to confirm by pressing the POINT UP/DOWN BUTTON(s). Press the SELECT (REAR CLICK) BUTTON. Another dialog box “PC ADJUSTMENT DISPLAY” will appear.
5.To quit the MENU, point to Quit and then press the SELECT (REAR CLICK) BUTTON.
6.To modify the parameter data, perform the steps 9 - 24 of PC ADJUSTMENT SECTION.
7.To clear the parameter data, move the arrow by pressing the POINT UP/DOWN BUTTON(s) to select Mode free. Press the SELECT (REAR CLICK) BUTTON. “OK?” is displayed for confirmation.
8.Move the arrow to Yes and then press the SELECT (REAR CLICK) BUTTON to clear the parameter data.
9.To quit the MENU, move the arrow to Quit and then press the SELECT (REAR CLICK) BUTTON.