Hughes & Kettner Comprehensive Guide to Techniques and Features of Attax 80

ATTAX-MANUAL

7)You have connected the RECORDING OUT jack to a mixing console, but you find it doesn't deliver the sound you had in mind.

The RECORDING OUT circuit is dual-purpose. It is also designed to allow you to feed its signal to an additional power amp and cabinet. For absolutely top-notch professio- nal recording purposes, route the signal through a Hughes & Kettner REDBOX before patching it to a mixing console.

7.0 TECHNICAL DATA

PREAMP SECTION:	CLEAN + LEAD solid state channels
INPUT:	-10 dBV/ 1M ohms
FX-RETURN:	-10dBV/ 47 k ohms
FX-SEND:	0 dBV/ 2.2 k ohms
REC.OUT:	0 dBV/ 800 ohms

POWERAMP SECTION:

'CURRENT FEEDBACK' solid state power amp

Output Power:	80	W rms into 8 ohms
	100		W rms into 4 ohms
PHONES:	0,5		W, 600 ohms
Frequency response:	20	Hz - 40 kHz (into 4 ohms)

Speakers:

CELESTION RockDriver Vintage, 12“, 8 ohms

GENERAL FEATURES:

Voltage:

230 V~ (European model)

117 V~ (North American model)

100 V~ (Japanese model)

Max. power consumption: 200 VA (into 4 ohms)

Mains Fuse:

slo-blo 1000 mA (230 V model) slo-blo 2000 mA (117 V model) slo-blo 2500 mA (100 V model)

Secondary Fuses:

2 x slo-blo 2500 mA (power amp)

Dimensions:

556 x 480 x 280 mm (W x H x D) 22“ x 19“ x 11“ (approx.)

Weight: approx. 38 Lbs./ 17 kg

10