Konica Minolta PageScope NetWare Print Setup, Verify the setup. See 4.3.5 Verifying the Setup

Page 21

4 Changing the Device Setup

4.3 NetWare Print Setup

Note

•You must have NetWare Client 32 installed on your system in order to setup for NetWare printing.

•NetWare supervisor privileges are required in order to change the NetWare Print Setup. You must login to the NetWare network with supervisor privileges in order to configure NetWare for printing.

•You must have IPX protocol installed on your device in order to configure a NetWare print setup.

•If you have already configured a NetWare print setup with another tool, the existing configuration will be deleted when you complete this setting.

Perform the following steps to configure a device for NetWare printing.

1.On the device list, click the icon of the device you want to configure.

2.Select Device Setup on the Setup menu to display the Device Setup dialog box.

You could also click the toolbar button.

3.Click the NetWare Printing tab.

4.Perform the following steps.

•Set up the print server. See 4.3.1 Setting up the Print Server.

•Select the mode. See 4.3.2 Selecting the Mode.

•Set up the print queue. See 4.3.3 Selecting the Print Queue.

•Select users for event notification. See 4.3.4 Selecting Users for Event Notification.

•Verify the setup. See 4.3.5 Verifying the Setup.

Note

•Clicking the NetWare Printing tab downloads the device configuration. Downloading can take anywhere from a few seconds to 20 or 30 seconds or more. Wait for the download procedure to complete before trying to do anything else.

•The community name input dialog box appears only if the SNMP community name has been changed to something other than the default name. Type in the community name and then click OK.

16

Image 21

Contents Network Setup Trademark Acknowledgements WelcomeContents Changing the Device Setup Appendix Glossary System Requirements Installing and Starting PageScope Network Setup Installing PageScope Network SetupStarting PageScope Network Setup Double-click the Add/Remove Programs icon Uninstalling PageScope Network SetupBrowsing Network Devices Screen Configuration➀ Menu bar ➁ Toolbar for the device list➂ Device list Device Name DeviceIP Address Device Model Name➄ Browser display area ➅ Toolbar for the browser display area➆ URL field Verifying Device Setup Status GeneralNetWare Printing TCP/IP Displaying the Device Alert PropertyDisplaying Device Output Tray Information For peer-to-peer printing with TCP/IP connection Configuring a Device with PageScope Network SetupFor peer-to-peer printing with IPX connection For printing via a NetWare print serverConfiguring Device Information Changing the Device SetupDevice Description IP Address Setup Obtain an IP address automatically Configuring TCP/IPRAW Port Number Specify an IP address manuallyVerify the setup. See 4.3.5 Verifying the Setup NetWare Print SetupEthernet Frame Type Print Queue Scan RateIf you are using NDS NetWare 4.x or lator If you are using bindery service NetWareChanging the Device Setup To select an existing print queue To create a new print queue Selecting Users for Event Notification Verifying the Setup Changing the Device Setup TCP/IP Peer-to-peer Printing Peer-to-peer Print SetupPeer-to-peer Print Setup Device Name DNS name IPX Peer-to-peer Printing Configuring IPX Peer-to-peer PrintingPeer-to-peer Print Setup Peer-to-peer Print Setup After Creating the Peer-to-peer Port Add new printerChange the port of the existing printer To change the port of an existing printer To add a new printerSelecting a Protocol Option SetupSpecifying the Search Range Add device manually Specify IP discovery rangeSpecifying Bootp Option Setup Disable Specifying Polling SettingsChanging the Password Appendix Glossary Subnet mask Port numberHttp//konicaminolta.com