Eiki LC-SX4LA To change code of Projector, To change code of Remote Control Unit

Page 40

SETTING

Power management

This function turns Projection Lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain Lamp-life. (This projector is shipped with this function ON.)

Power Management function operates to turn Projection Lamp off when input signal is interrupted and any button is not pressed over 5 minutes. This function operates as follows;

1.When any input signal is interrupted, “No signal” and counting down display appears (for 5 minutes).

2.After counting down for 5 minutes, projector lamp and READY indicator are turned off.

3.When READY indicator flashing, Projection Lamp can be turned on again (Power Management mode).

In this Power Management mode, Projection Lamp is automatically turned on when input signal connected or projector is operated with any button on Top Control or on Remote Control Unit again.

On start

When this function is “On,” projector is automatically turned on just by switching MAIN ON/OFF SWITCH on.

Note ; Be sure to turn projector off properly (refer to section “TURNING OFF PROJECTOR” on P21). If projector is turned off in wrong steps, On Start function does not operate properly.

Time left until Lamp off.

Press SELECT button at this icon to display other items.

On start

Press SELECT button at this icon to display previous items.

Move pointer to item and then press

POINT LEFT/RIGHT button(s).

Lamp Mode

This Projector is equipped with 2 Projection Lamps and a number of using lamps can be switched to 2 lamps or 1 lamp. Using 1 lamp maintain life of Projection Lamps.

To change over Lamp Mode

1.Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to select SETTING and press SELECT button. Setting dialog box appears.

2.Press POINT DOWN button to move a red frame pointer to “Lamp mode”. Set "2 lamps mode" or "1 lamp mode" by pressing POINT LEFT/RIGHT button(s). When Lamp Mode is set from "2 lamps mode" to "1 lamp mode" image becomes little darker. When Lamp Mode is set from "1 lamp mode" to "2 lamps mode" image become brighter gradually.

NOTE : After changing Lamp Mode, it cannot be switched again for 90 seconds.

Remote control

This projector has two different remote control codes; factory-set normal code (Code 1) and secondary code (Code 2). This switching function prevents remote control operation mixture (jam) when operating several projectors or video equipment together.

When operating projector in “Code 2,” both projector and Remote Control Unit must be switched to “Code 2.”

To change code of Projector;

Set Remote control in SETTING MENU to “Code 2.”

To change code of Remote Control Unit;

Press both MENU and IMAGE buttons on Remote Control Unit together for over 10 seconds.

After changing code, make sure Remote Control operates properly.

To return to normal code (Code 1), operate both projector and Remote Control in ways above again.

NOTE : When batteries of Remote Control Unit are replaced or ALL-OFF switch is turned to “ALL-OFF,” remote transmit code automatically returns to normal code (Code 1).

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Model LC-SX4La Multimedia ProjectorTo the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Features and Design CompatibilityPreparation Name of Each Part of ProjectorConnecting AC Power Cord SETTING-UP ProjectorFor U.S.A. and Canada For Continental Europe Lens Shift Adjustment Preparation Lens InstallationPositioning Projector Preparation Picture Level and Tilt Adjustment Moving ProjectorReplacement of Terminal Connecting ProjectorTerminals of Projector Connecting Projector INPUT/OUTPUT Terminals and Jacks Input Input 1, 2Audio Output Jacks Connecting to Computer Terminals ProjectorConnecting to Video Equipment 2INPUT Terminals of a ProjectorTOP Controls and Indicators Before OperationOperation of Remote Control Laser Pointer FunctionRemote Control Batteries Installation Operating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Screen MenuBasic Operation Turning on / OFF ProjectorTurning on Projector Turning OFF ProjectorFocus Adjustment Adjusting ScreenKeystone Adjustment Basic Operation Picture Freeze Function Timer FunctionNo Show Function Sound Adjustment Direct OperationMenu Operation Sound MenuComputer Input Selecting Input SourceSelecting Computer System InputComputer Input Automatic MULTI-SCAN System Select Computer System ManuallyAuto PC System MenuComputer Input Compatible Computer Specifications ResolutionPC Adjustment Auto PC AdjustmentPC Adjust Menu Computer InputComputer Input Manual PC Adjustment Display area H Display areaFull screen Picture Image Adjustment Image Level Select DirectImage Level Select Menu Image Select MenuComputer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuWhen Select Input 2 5 BNC Terminal Video InputSelecting Video System Video InputAuto AV System Menu Video or S-VIDEOCinema Video Input Image Level Adjustment ColorTint Noise reductionProvides image at a normal video aspect ratio of 4 Setting Menu SettingSetting Menu To change code of Remote Control Unit To change code of ProjectorProjector mode Wireless Mouse modeLamp counter reset Operating Wireless Mouse MaintenanceInstallation Operating Wireless MouseAppendix AIR Filter Care and Cleaning Cleaning Projection LensAppendix Lamp Management Yellow Lamp Dim Lamp Red Lamp Mark on LampAppendix Lamp Replacement Figure shows case of replacing LampLamp Handling Precautions Troubleshooting Remote Control Unit Wireless MouseDoes not work Function does notTechnical Specifications Appendix Configurations of Terminals DVI-I Terminal DIGITAL/ANALOGUSB Port Terminal Key to better communications Canada

LC-SX4LA specifications

The Eiki LC-SX4LA is an advanced multimedia projector designed for various applications, including education, corporate presentations, and large venues. Known for its high-quality projection capabilities, the LC-SX4LA offers an impressive array of features that cater to the needs of professional users.

One of the standout features of the Eiki LC-SX4LA is its exceptional brightness. With a luminosity of up to 5,500 ANSI lumens, this projector ensures clear and vibrant images, even in well-lit environments. This high brightness level makes it suitable for large conference rooms, auditoriums, and classrooms where ambient light can be an issue.

The LC-SX4LA utilizes 3LCD technology, providing excellent color reproduction and outstanding image quality. This technology helps to eliminate the color wheel artifacts found in some single-chip projectors, resulting in rich, true-to-life colors. The contrast ratio of 3,000:1 ensures that the projector delivers deep blacks and bright whites, enhancing the overall viewing experience.

Another notable characteristic of the Eiki LC-SX4LA is its native resolution of XGA (1024 x 768). This resolution is ideal for a wide range of presentations, from detailed spreadsheets to dynamic video content. The projector supports various resolutions, making it versatile for different types of media. In addition, the LC-SX4LA features a powerful zoom lens, providing flexibility in installation and allowing users to project large images from varying distances.

Connectivity is another area where the Eiki LC-SX4LA excels. It offers multiple input options, including HDMI, VGA, and composite video connections, allowing seamless integration with numerous devices such as laptops, DVD players, and gaming consoles. The inclusion of a built-in network capability enables wireless presentations, further enhancing the projector's functionality.

Furthermore, the LC-SX4LA is designed with a long lamp life of up to 5,000 hours in normal mode and up to 10,000 hours in eco mode. This extends the lifespan of the projector, reducing maintenance costs and ensuring reliable performance over time. Its compact and lightweight design enhances portability, making it easy to transport between different locations.

In conclusion, the Eiki LC-SX4LA is a powerful multimedia projector equipped with advanced features and technologies. Its high brightness, excellent color accuracy, versatile connectivity, and long-lasting performance make it an ideal choice for anyone looking to deliver impactful presentations in various settings.
Top Page Image Contents