Eiki LC-SX4LA instruction manual Appendix, Operating Wireless Mouse, Maintenance, Installation

Page 42

APPENDIX

OPERATING WIRELESS MOUSE

Wireless Remote Control Unit is not only able to operate this projector but also usable as a wireless mouse for most Personal Computers. POINT buttons and two CLICK buttons are used for wireless mouse operation.

This Wireless Mouse function is available only when PC mouse pointer is displayed on a projected screen. When ON- SCREEN MENU or any message / dialog box is displayed on screen instead of PC mouse pointer, this Wireless Mouse function cannot be used.

INSTALLATION

To use Wireless Remote Control Unit as Wireless Mouse for a Personal Computer, installation of mouse driver (not supplied) is required. Make sure that mouse driver is properly installed in your computer. And make sure that mouse port (or USB port) of a Personal Computer is activated.

1

Connect mouse port (or USB port) of your computer to Control

Port (or USB connector) of this projector with Control Cable (or

 

USB cable). (Refer to page 13, 14 for connection.)

2

Turn a projector on first, and then turn on your computer. When

computer is switched on first, Wireless Mouse may not work

properly.

Note : When your computer has no mouse port, connect Serial Port of your computer to Control Port of a projector with Control Cable for Serial Port (not supplied).

OPERATING WIRELESS MOUSE

When controlling a PC mouse pointer, operate Wireless Mouse with POINT button, SELECT button, and RIGHT CLICK button on Wireless Remote Control Unit.

POINT button

POINT button (Move pointer)

Used to move PC mouse pointer. Pointer is moved corresponding with direction you are pressing.

SELECT (LEFT CLICK) button

This button has same function as left button in a PC mouse.

RIGHT CLICK button

This button has same function as right button in a PC mouse. This button is not available for controlling this projector.

SELECT button

RIGHT CLICK button

(left button of mouse)

(right button of mouse)

MAINTENANCE

WARNING TEMP. INDICATOR

WARNING TEMP. Indicator flashes red and projector is automatically turned off when an internal temperature of a projector exceeds normal temperature. Wait at least 5 minutes before turning on projector again.

When WARNING TEMP. Indicator continues to flash, check items listed below.

1

Ventilation Slots of a projector may be blocked. In such an event, reposition a projector so that Ventilation Slots are

not obstructed.

2

Air Filter may be clogged with dust particles. Clean Air Filter by following section AIR FILTER CARE AND CLEANING

on next page.

3

If WARNING TEMP. Indicator remains on after performing above checks, Cooling Fans or Internal Circuits may be

malfunctioning. Contact service personnel from an authorized dealer or a service station.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Model LC-SX4La Multimedia ProjectorTo the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Features and Design CompatibilityPreparation Name of Each Part of ProjectorSETTING-UP Projector Connecting AC Power CordFor U.S.A. and Canada For Continental Europe Preparation Lens Installation Lens Shift AdjustmentPositioning Projector Preparation Picture Level and Tilt Adjustment Moving ProjectorConnecting Projector Replacement of TerminalTerminals of Projector Connecting Projector INPUT/OUTPUT Terminals and Jacks Input Input 1, 2Audio Output Jacks Connecting to Computer Terminals ProjectorConnecting to Video Equipment 2INPUT Terminals of a ProjectorTOP Controls and Indicators Before OperationOperation of Remote Control Laser Pointer FunctionRemote Control Batteries Installation HOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Screen MenuTurning on Projector Basic OperationTurning on / OFF Projector Turning OFF ProjectorAdjusting Screen Focus AdjustmentKeystone Adjustment Timer Function Basic Operation Picture Freeze FunctionNo Show Function Menu Operation Sound AdjustmentDirect Operation Sound MenuSelecting Computer System Computer InputSelecting Input Source InputAuto Computer Input Automatic MULTI-SCAN SystemSelect Computer System Manually PC System MenuComputer Input Compatible Computer Specifications ResolutionPC Adjust Menu PC AdjustmentAuto PC Adjustment Computer InputComputer Input Manual PC Adjustment Display area Display area HFull screen Image Level Select Menu Picture Image AdjustmentImage Level Select Direct Image Select MenuComputer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuWhen Select Input 2 5 BNC Terminal Video InputAuto Selecting Video SystemVideo Input AV System Menu Video or S-VIDEOCinema Tint Video Input Image Level AdjustmentColor Noise reductionProvides image at a normal video aspect ratio of 4 Setting Setting MenuSetting Menu To change code of Remote Control Unit To change code of ProjectorWireless Mouse mode Projector modeLamp counter reset Installation Operating Wireless MouseMaintenance Operating Wireless MouseAppendix AIR Filter Care and Cleaning Cleaning Projection LensAppendix Lamp Management Yellow Lamp Dim Lamp Red Lamp Mark on LampAppendix Lamp Replacement Figure shows case of replacing LampLamp Handling Precautions Troubleshooting Does not work Remote Control UnitWireless Mouse Function does notTechnical Specifications Appendix Configurations of Terminals DVI-I Terminal DIGITAL/ANALOGUSB Port Terminal Key to better communications Canada

LC-SX4LA specifications

The Eiki LC-SX4LA is an advanced multimedia projector designed for various applications, including education, corporate presentations, and large venues. Known for its high-quality projection capabilities, the LC-SX4LA offers an impressive array of features that cater to the needs of professional users.

One of the standout features of the Eiki LC-SX4LA is its exceptional brightness. With a luminosity of up to 5,500 ANSI lumens, this projector ensures clear and vibrant images, even in well-lit environments. This high brightness level makes it suitable for large conference rooms, auditoriums, and classrooms where ambient light can be an issue.

The LC-SX4LA utilizes 3LCD technology, providing excellent color reproduction and outstanding image quality. This technology helps to eliminate the color wheel artifacts found in some single-chip projectors, resulting in rich, true-to-life colors. The contrast ratio of 3,000:1 ensures that the projector delivers deep blacks and bright whites, enhancing the overall viewing experience.

Another notable characteristic of the Eiki LC-SX4LA is its native resolution of XGA (1024 x 768). This resolution is ideal for a wide range of presentations, from detailed spreadsheets to dynamic video content. The projector supports various resolutions, making it versatile for different types of media. In addition, the LC-SX4LA features a powerful zoom lens, providing flexibility in installation and allowing users to project large images from varying distances.

Connectivity is another area where the Eiki LC-SX4LA excels. It offers multiple input options, including HDMI, VGA, and composite video connections, allowing seamless integration with numerous devices such as laptops, DVD players, and gaming consoles. The inclusion of a built-in network capability enables wireless presentations, further enhancing the projector's functionality.

Furthermore, the LC-SX4LA is designed with a long lamp life of up to 5,000 hours in normal mode and up to 10,000 hours in eco mode. This extends the lifespan of the projector, reducing maintenance costs and ensuring reliable performance over time. Its compact and lightweight design enhances portability, making it easy to transport between different locations.

In conclusion, the Eiki LC-SX4LA is a powerful multimedia projector equipped with advanced features and technologies. Its high brightness, excellent color accuracy, versatile connectivity, and long-lasting performance make it an ideal choice for anyone looking to deliver impactful presentations in various settings.
Top Page Image Contents