System Requirements
Resolved Caveats—Release 12.1(2)XF2
This section describes possibly unexpected behavior by software releases prior to Release 12.1(2)XF2 that have been resolved in Release 12.1(2)XF2 and above.
CSCds05811
If secondary IP addresses are configured on either an Ethernet or FastEthernet interface and the
Open Caveats—Release 12.1(2)XF1
This section describes possibly unexpected behavior by Release 12.1(2)XF1.
CSCds37736
Cisco 801 through 804 router initialization ignores the CPU type and always loads the micro code for the MPC850.
Open Caveats—Release 12.1(2)XF
This section describes possibly unexpected behavior by Release 12.1(2)XF.
CSCdr49075
On a Cisco 800 series router, the configuration for the second POTS port might not take effect if a called party number for an incoming call on an ISDN line is not provided.
Related Documentation
The following sections describe the documentation available for the Cisco 811 and 813 Routers. Typically, these documents consist of hardware and software installation guides, Cisco IOS configuration and command references, system error messages, feature modules, and other documents.
Documentation is available as printed manuals or electronic documents, except for feature modules, which are available online on Cisco.com and the Documentation
Use these release notes with the documents listed in the following sections:
•
•
•Feature Modules
•Cisco IOS Software Documentation Set
|
| Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF |
|
|
|
|
|
| |||
|
|
| 13 |
| |
|
|
|
|