Intel 813, 811 manual System Requirements, Memory Requirements, Hardware Supported

System Requirements

System Requirements

This section describes the system requirements for Release 12.1(2)XF5 and includes the following sections:

•Memory Requirements

•Hardware Supported, page 2

•Determining Your Software Release, page 3

•Upgrading to a New Software Release, page 3

•Feature Set Tables, page 4

Memory Requirements

This section describes the memory requirements for the Cisco IOS feature sets supported by Cisco IOS Release 12.1(2)XF5 on the Cisco 811 and 813 Routers.

Table 1 Memory Requirements for the Cisco 811 and 813 Routers

			Required	Required
			Flash	DRAM	Runs
Platforms	Image Name	Image	Memory	Memory	From
Cisco 811	IP	c800-y6-mw	4 MB	8 MB	RAM
and 813
	IP Plus	c800-sy6-mw	4 MB	8 MB	RAM
	IP/IPX Plus	c800-nsy6-mw	4 MB	8 MB	RAM
	IP/FW	c800-oy6-mw	4 MB	8 MB	RAM
	IP/FW Plus IPSec 56	c800-osy656i-mw	8 MB	8 MB	RAM
	IP/IPX/FW Plus IPSec 56	c800-nosy656i-mw	8 MB	8 MB	RAM

Hardware Supported

Cisco IOS Release 12.1(2)XF5 supports the following Cisco 800 series routers:

•Cisco 811

•Cisco 813

For detailed descriptions of new hardware features, see New and Changed Information, page 6.

		Table 2	Supported Interfaces for the Cisco 800 Series
						Analog Phone	Console
		Router		Ethernet LAN Ports	Ethernet WAN Ports	Ports	Ports
		Cisco 811		One 10BaseT (RJ-45)	• One ISDN BRI U,	–	RJ-45
					integrated DSU (RJ-11),
					• One ISDN BRI S/T (R-J45)
		Cisco 813		One 10BaseT (RJ-45)	• One ISDN BRI U,	Two (RJ-11)	RJ-45
				4-port hub	integrated DSU (RJ-11),
					• One ISDN BRI S/T (R-J45)
	Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF
2						78-11070-02, Rev. H0