Konica Minolta PagePro 1350W manual Printer control panel, Cancel button, Ready, Error

Printer control panel

The PagePro 1350W has two LEDs that indicate the status of the printer.

Ready	Error	Printer condition
Off	Off	Printer power off
On	Off	Printer ready
On	On	Initializing (or cancelling
		job)
Off	On	Printer cover open
Blink	Blink	Communication error
Off	Slow blink	Paper out
Off	Blink	Paper jam
Off	Rapid blink	Service call required
Rapid blink	Rapid blink	Paper size error (or
		waiting for manual
		duplex)
Blink	Off	Printing
Rapid blink	Off	Warming up
Slow blink	Off	Power save
On	Slow blink	Toner cartridge low
On	Blink	Toner cartridge empty
On	Rapid blink	Incorrect toner cartridge
		installed

Cancel button

Press and hold the Cancel button for more than 5 seconds to cancel the current job. In the event of a paper mismatch error (a paper size requested by the job is not loaded in the printer) or when manually duplex printing (using the PagePro 1350W driver), press the Cancel button for less than 5 seconds after reloading paper in the printer.

Select duplex printing for

manually printing on both sides of the page. Use the Cancel button as directed.

15