Printing with KP
Printer Options
5.Media Type
To access your choices for the Media Type feature, enter 5 at the Printer Options List. The choices you will see are as follows:
Media Type choices
1.Plain Paper (default)
2.OHP Transparency
3.Thin Paper
4.Thick Paper
Enter selection number for Media Type [1]:
To change the setting, press the number of your choice; pressing Return will take you back to the Printer Options List.
∃Media Type selection allows you to set the printer to print on a specific type of paper. For best results, use only paper rec ommended by Konica.
For more information about Media Type settings, refer to the User's Reference Guide included with your Konica Workgroup Document System.
6.Duplex Mode
To access your choices for the Duplex Mode feature, enter 6 at the Printer Options List. The choices you will see are as follows:
Duplex Mode choices
1.Off (default)
2.Long Edge Binding
3.Short Edge Binding
Enter selection number for Duplex Mode [1]:
To change the setting, press the number of your choice; pressing Return will take you back to the Printer Options List.
∃Duplex printing prints on both sides of a sheet. Descriptions of binding options are as follows:
Long Edge Binding | Short Edge Binding |
|
|
For more information about Duplex settings, refer to the User's Reference Guide included with your Konica Workgroup Document System.
Konica Print Utility 22