Intel SSDSA2MH080G1 Ordering Information, Decoder, Part Number MM # Device Nomenclature Packaging

Ordering Information

Decoder

S

S

D

S

A

1

M

H

0

8

0

G

1

Product Type Designator

SSD= Solid State Disk

Bus Architecture

PA = PATA

Product Generation

SA = SATA

US = Universal Serial Bus

1-9 Generations

Form Factor

Density

1 = 1.8" Drive

004G

=

4 GB

2 = 2.5" Drive

Product Technology Type

008G

=

8 GB

016G

= 16 GB

S = Single Level Cell

032G

= 32 GB

M = Multi-Level Cell

064G

= 64 GB

Feature

080G

= 80 GB

H = High Performance

Intel High Performance Solid State Drive Ordering Information

Part Number	MM #			Device Nomenclature	Packaging
SSDSA1MH080G1	895506	80	GB SATA 1.8” 5 mm Drive, MLC, 50 nm, Qualification Sample		1 unit
SSDSA2MH080G1	895507	80	GB SATA 2.5”	7 mm Drive, MLC, 50 nm, Qualification Sample	1 unit
SSDSA2MH080G1	898189	80	GB SATA 2.5”	9.5 mm Drive, MLC, 50 nm, Qualification Sample	1 unit

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications.

Intel may make changes to specifications and product descriptions at any time, without notice.

Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights.

IMPORTANT - PLEASE READ BEFORE INSTALLING OR USING INTEL® PRE-RELEASE PRODUCTS.

Please review the terms at http://www.intel.com/netcomms/prerelease_terms.htm carefully before using any Intel® pre-release product, including any evaluation, development or reference hardware and/or software product (collectively, “Pre-Release Product”). By using the Pre-Release Product, you indicate your acceptance of these terms, which constitute the agreement (the “Agreement”) between you and Intel Corporation (“Intel”). In the event that you do not agree with any of these terms and conditions, do not use or install the Pre-Release Product and promptly return it unused to Intel.

Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.

This document contains information on products in the design phase of development. The information here is subject to change without notice. Do not finalize a design with this information.

This Advance Product Manual as well as the software described in it is furnished under license and may only be used or copied in accordance with the terms of the license. The information in this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Intel Corporation. Intel Corporation assumes no responsibility or liability for any errors or inaccuracies that may appear in this document or any software that may be provided in association with this document.

Except as permitted by such license, no part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of Intel Corporation.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an order number and are referenced in this document, or other Intel literature may be obtained by calling 1-800-548- 4725 or by visiting Intel's website at http://www.intel.com.

*Other names and brands may be claimed as the property of others. Copyright © 2008, Intel Corporation. All Rights Reserved.

Intel® X18-M/X25-M SATA Solid State Drive
Advance Product Manual	July 2008
2	Order Number: 319765-002US