INSTALLATIONS
Reset Switch: Pins 7 and 15
The reset switch allows the user to reset the system without turning the main power switch off and then on again. Orientation is not required when making a connection to this header.
Pin # | Signal Name |
7 | Reset# |
15 | Ground |
Hard Disk Drive LED Connector: Pins 8 and 16
This connector connects to the hard drive activity LED on control panel. This LED will flash when the HDD is being accessed.
|
| Pin # | Signal Name |
|
| 8 | HDD Active |
|
| 16 | 5V |
J6: TMDS Connector |
|
|
|
Signal Name | Pin # | Pin # | Signal Name |
TX1P | 1 | 11 | TX2P |
TX1N | 2 | 12 | TX2N |
GND | 3 | 13 | GND |
GND | 4 | 14 | GND |
TXCP | 5 | 15 | TXOP |
TXCN | 6 | 16 | TXON |
GND | 7 | 17 | NC |
VCC+5V | 8 | 18 | NC |
HPDET | 9 | 19 | DDCDATA |
NC | 10 | 20 | DDCCLK |
20 |