Intel IB935 PNP/PCI Configurations, PNP OS Installed, Init Display First, Resources Controlled by

BIOS SETUP

PNP/PCI Configurations

This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value.

Phoenix - AwardBIOS CMOS Setup Utility

PnP/PCI Configurations

PNP OS Installed	No
Init Display First	PCI Slot	ITEM HELP
Reset Configuration Data	Disabled
		Menu Level >
Resources Controlled By	Auto (ESCD)
IRQ Resources	Press Enter
DMA Resources	Press Enter
PCI/VGA Palette Snoop	Disabled
**PCI Express relative items**
Maximum Payload Size	128

PNP OS Installed

Enable the PNP OS Install option if it is supported by the operating system installed. The default value is No.

Init Display First

The default setting is PCI Card.

Reset Configuration Data

This field allows you to determine whether to reset the configuration data or not. The default value is Disabled.

Resources Controlled by

This PnP BIOS can configure all of the boot and compatible devices automatically with the use of a use a PnP operating system such as Windows 95.

PCI/VGA Palette Snoop

Some non-standard VGA display cards may not show colors properly. This field allows you to set whether or not MPEG ISA/VESA VGA cards can work with PCI/VGA. When this field is enabled, a PCI/VGA can work with an MPEG ISA/VESA VGA card. When this field is disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card.

Maximum Payload Size

The default setting of the PCI Express Maximum Payload Size is 128.

IB935 User’s Manual 41