Installation
In | Folded Optics | ||||||
to fold the optical path, as shown in Figure |
| ||||||
be accurately set. If you are considering this type of installation, contact your dealer for |
| ||||||
assistance. |
| ||||||
Screen |
|
|
| Mirror |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Figure 3-4. Folded Optics
Other considerations and tips that can help improve your installation: | Other Considerations |
•Keep the ambient temperature constant and below 35°C (95°F). Keep the projector away from heating and/or air conditioning vents. Changes in temperature may cause drifts in the projector circuitry, which may affect performance.
•Keep the projector away from devices that radiate electromagnetic energy such as motors and transformers. Common sources of these include slide projectors, speakers, power amplifiers and elevators.
If you are installing a standard
If you are installing a CineWide projector equipped with a prismatic (Whitney) anamorphic lens, proceed with Installing the Fixed CineWide Base Plate (Prismatic Lens) (page 23).
If you are installing a Vision 65/75/CineWide with a cylindrical |
|
(Rainier II or McKinley) anamorphic lens, proceed with Installing | U |
| S |
the Fixed CineWide Base Plate (Cylindrical Lens) (page 24). | C |
O | |
| F |
If you are installing a Vision 65/CineWide with AutoScope or Vision 75/CineWide with AutoScope, proceed as follows to install the AutoScope lens motor.
1. Do not install the CineWide lens yet, only the fixed CineWide base plate
Note or AutoScope lens motor. You will install the CineWide lens after you
install the projector and adjust the primary lens.
2. Some components shipped with your projector may differ slightly from what is shown in these instructions.
3.4
Installing the Optional CineWide Lens Mount
Vidikron Vision Model 65/Model 75 Installation/Operation Manual | 19 |
