Vidikron Vision 65 Specifications Vision Model 75 Series, Model 65 Series, Lamp, Video Inputs

Specifications

Table 7-1. Vision 65/75 Specifications (continued)

Brightness and Contrast:	Cinema Standards Measurement System (CSMS)
	Specifications – Vision Model 65 Series
	- Brightness*: 13.6 to 19.6 foot-Lamberts (fL)
	- Contrast Ratio*: 200:1 to 220:1
	Cinema Standards Measurement System (CSMS)
	Specifications – Vision Model 75 Series
	-	Brightness*: 14.8 to 21.7 foot-Lamberts (fL)
	-	Contrast Ratio*: 200:1 to 230:1
	*Variable depending on VAC setting
	These measurements are taken from the projector in a
	controlled, home theater environment. All measurements are
	made to ANSI/NAPM IT7.228-1997 specifications using the
	Photo Research PR-650 SpectraColorimeter and Minolta LS-100
	Luminance Meter, Video Essentials test DVD and a 1.3 gain,
	72-inch wide screen. The projector is calibrated to a color
	temperature of 6,500K and has a minimum of 150 hours of
	usage.
	The foot-Lambert (fL) is the unit of measurement used in
	commercial movie theaters to express image brightness at the
	screen surface. The Society of Motion Picture and Television
	Engineers (SMPTE) specifies 16 fL as the target image brightness
	for film-based projectors using an open gate (without film in the
	projector). More importantly, today SMPTE specifies 12 fL as the
	target image brightness in Digital Cinema theaters. The
	foot-Lambert measurement is dependent on screen size, screen
	gain and projector light output.
	Home Theater Calibration Specifications – Vision
	Model 65 Series
	- Light Output: 436 to 541 ANSI Lumens
	- Contrast Ratio*: 200:1 to 220:1
	Home Theater Calibration Specifications – Vision
	Model 75 Series
	-	Light Output: 451 to 589 ANSI Lumens
	-	Contrast Ratio*: 200:1 to 230:1
	These specifications are obtained by calibrating the projector as
	described above for CSMS measurements.
	Industry-Standard Specifications – Vision Model 65 Series
	- Light Output: 1150 ANSI Lumens
	-	Contrast Ratio: 3000:1
	Industry-Standard Specifications – Vision Model 75 Series
	-	Light Output: 1290 ANSI Lumens
	-	Contrast Ratio: 11,000:1
	These are typical projector brightness and contrast
	specifications found in most companies’ sales literature.
	Vidikron includes these measurements in its literature to allow
	for direct comparison with other manufacturers’ projectors.
	These measurements are typically taken at 9,000K to 13,000K to
	get expected performance data when the projector is used in
	professional, commercial and industrial displays.
Lamp:	200 Watts
Estimated Lamp Life:	2000 hours
Video Inputs:	(1) Composite Video, (1) S-Video, (1) RGB/Component Video
	(5 x BNC), (1) RCA Component Video (3 x RCA), (2) HDMI

72 Vidikron Vision Model 65/Model 75 Installation/Operation Manual