Installation
4.If you are mounting the projector on a ceiling: Line up the four holes on the projector ceiling mounting plate (included with the projector ceiling mount kit) with those on the bottom of the projector.
Note | The hole pattern on the CineWide base plate is identical to that on the |
ceiling mounting plate. |
5.Secure the CineWide base plate (and ceiling mounting plate, if needed) to the projector with the M6x12mm screws (item #1) and nylon spacers provided with the CineWide lens base plate.
1. Do not use the mounting screws provided with the ceiling mounting Caution plate. Use only the hardware provided with the CineWide lens base
plate.
2. DO NOT
There are several methods for mounting the projector. Depending on your chosen installation, one method may be more suitable than another.
In typical front and rear screen installations, the projector can be placed upright on a secure and level surface such as a table or cart. Carts are useful when moving a projector during a presentation or from site to site. If possible, lock the wheels when it’s in position to prevent it from being moved during a presentation.
3.5
Mounting the Vision 65/75
Floor Mounting (Upright)
For fixed installations, and for those that want the projector out of sight or have a limited | Ceiling Mounting (Inverted) |
space for projector and audience, you can invert the Vision 65/75 and suspend it from the |
|
ceiling using a |
|
Use only the
Caution projector (part number
Tighten all screws securely, but do not
The projector can also be inverted and placed in an enclosure above and behind the viewing area. Install four feet on the inside bottom surface of the enclosure on which the projector can rest. A variety of materials can be used for this purpose (for example, rubber crutch tips or turntable feet).
Vidikron Vision Model 65/Model 75 Installation/Operation Manual | 25 |
