Vidikron Vision 65, Vision 75 operation manual Motor, AutoScope motor assembly

Installation

Installing the AutoScope Lens	➤	Figure 3-5shows the Vision 65/CineWide with AutoScope or Vision 75/CineWide with
Motor		AutoScope motor assembly.

CineWide with AutoScope 4

Ceiling Mount Adapter/

Projector Stand, Right

Screw, Phillips Flat-Head, 3 10-32 x 1/4” (2x)

AutoScope Lens Motor 2

Screw, Phillips 1 Pan-Head,

10-32 x 1/2” (4x)

CineWide with 5

AutoScope

Ceiling Mount Adapter/

Projector Stand, Left

6 Screw, Phillips Flat-Head, Undercut,

M6 x 12mm

(4x)

Nylon Spacer, 7 5/8” diameter x

3/16” high (4x)

Figure 3-5. Vision 65/CineWide with AutoScope or Vision 75/CineWide with AutoScope Motor Assembly – Exploded View

Remove Projector Front Height Adjusters:

Place the projector upside down on a blanket or other soft surface. Then, remove the two height adjusters at the front of the projector by turning them counterclockwise until they come out.

20 Vidikron Vision Model 65/Model 75 Installation/Operation Manual