Installation
The Vision 65/75 gives you a great deal of control over the picture size, position and focus. | 3.8 | |
|
| Primary Lens Adjustments |
To focus the projected image, grasp the lens by the outer |
| Focus and Zoom |
ring and rotate it. | Zoom |
|
|
| |
To make the picture smaller (zoom out) or larger (zoom in), | in |
|
move the zoom tab in the appropriate direction. | Zoom |
|
|
| |
| out |
|
Focus
To shift the projected image vertically, press the LENS button, then press and hold the up or 
, 
) button.
PIP | ACT | PIP + |
FOCUS ZOOM LENS
Vertical Lens Shift
The Vision 65/75 OSD language is initially set to English, but can also display the menus in French, Spanish, Italian or German. To change the OSD language:
1.Press MENU.
2.Select Installation from the Main Menu and press ENTER.
3.Select Language from the Installation Menu.
4.Press 
or 
to select the desired language. (The change takes effect immediately.)
By default, the Vision 65/75 is configured for a “floor/front” installation, in which the projector is installed upright and in front of the screen. If it is installed behind the screen and/or mounted on a ceiling, you must change the picture orientation. To do this:
1.Press MENU on the remote control.
2.Select Installation from the Main Menu and press ENTER.
3.Select Orientation from the Installation Menu.
4.Choose Floor Rear, Ceiling Front or Ceiling Rear to match the installation method.
3.9
Changing the OSD Language
3.10
Adjusting the Picture Orientation
Vidikron Vision Model 65/Model 75 Installation/Operation Manual | 33 |
