Vidikron Vision 65, Vision 75 3.2 Quick Setup

Installation

14 Vidikron Vision Model 65/Model 75 Installation/Operation Manual

3.2

Quick Setup

Table 3-1 gives a quick overview of the Vision 65/75 installation process. The sections

following this one provide detailed instructions.

Installation should be performed by a qualified custom video installation

specialist.

Table 3-1. Installation Overview

Step Procedure For Details, Refer to

page...

1Choose a location for the projector 15

2

If installing a CineWide-equipped projector: Install

AutoScope lens motor or fixed CineWide base plate

(optional)

19

3Mount the projector 25

4Connect signal sources to the Vision 65/75 27

5Connect external controller to RS-232 port (optional) 30

6Connect 12-volt trigger output to AutoScope lens motor or

other equipment (optional)

31

7Apply power to the projector 32

8Primary lens adjustments: focus, projected image size (zoom)

and position (shift)

18, 33

9Change the OSD Language (optional) 33

10 For rear-screen and/or ceiling-mount installations, select the

proper picture orientation

33

11 Install CineWide anamorphic lens (optional) 34

12 CineWide lens adjustments: position, pitch (angle), geometry

and focus

35

13

Projector calibration: adjust the following for each input,

starting with Component 1; save settings when finished:

Aspect ratio

Brightness

Contrast

Color level

Tint

Input position

51 through 56

Note

Contents

Main 1080p DLP Home Theater Projectors 65/75 Page TWO YEAR LIMITED WARRANTY Page PRODUCT INFORMATION RETAIN FOR YOUR RECORDS Important Safety Instructions Compliance Information Page Page Table of Hazardous Substances Page Page Page Page Page Page 1.1 About This Manual 1.2 Using This Manual DANGER! WARNING 1.3 Description, Features and Benefits Page Page Page Page 2.2 Vision 65/75 Rear Panel Controls and Functions Vidikron Vision Model 65/Model 75 Installation/Operation Manual 9 2.3 Vision 65/75 Remote Control Figure 2-4. Vision 65/75 Remote Control LIGHT OFF ON ENTER Page Page Page 3.1 Remote Control 3.2 Quick Setup Table 3-1. Installation Overview 3.3 Installation Considerations Table 3-2. Projector Installation Options Table 3-3. Throw Ratios for the Vision 65/75 Series Vertical and Horizontal Position Figure 3-2. Projector Placement Table 3-3. Throw Ratios for the Vision 65/75 Series (continued) Ceiling Installation Floor Installation Page 3.4 Installing the Optional CineWide Lens Mount Page Page Page Page Page 3.5 Mounting the Vision 65/75 Page 3.6 Connections to the Vision 65/75 Page Page Page Page 3.7 Turning on the Power Page 3.11 Installing and Adjusting the CineWide Anamorphic Lens Installation Vidikron Vision Model 65/Model 75 Installation/Operation Manual 35 Cylindrical Anamorphic Lens Installation and Adjustment Figure 3-17. Cylindrical Anamorphic Lens Mounting Assembly - Exploded View Page Page Page Wrong Position Correct Position Page Page Page 4.1 Selecting Video Memory 4.2 Selecting an Aspect Ratio 4.3 Adjusting the Picture 4.4 Selecting An Input Source 4.5 Using Picture-In-Picture (PIP) 4.6 Using the On-Screen Menus Operation Figure 4-1. Vision 65/75 OSD Menu Structure Setup Information Installation Aspect Ratio Page Page Page Page Page Table 4-1. Aspect Ratio Settings Page Table 4-1. Aspect Ratio Settings (continued) -+ -+ Page WARNING Page Page Page Page Page 5.1 Lamp Replacement 5.2 Troubleshooting Tips Table 5-1. Troubleshooting Chart Table 5-1. Troubleshooting Chart (continued) Page 6.1 RS-232 Connection and Port Configuration 6.2 Serial Command Syntax Table 6-1. Serial Commands Page Table 6-1. Serial Commands (continued) Page 7.1 Vision 65/75 Specifications Table 7-1 lists the Vision 65/75 specifications. Table 7-1. Vision 65/75 Specifications Page Table 7-1. Vision 65/75 Specifications (continued) Specifications 74 Vidikron Vision Model 65/Model 75 Installation/Operation Manual 7.2 Vision 65/75 Dimensions Figure 7-1 shows the Vision 65/75 dimensions (all dimensions are in inches). Figure 7-1. Vision 65/75 Dimensions (with Optional Fixed Anamorphic Lens) 7.3 Supported Timings Table 7-2 lists the signal types supported by each input on the Vision 65/75. Table 7-2. Supported Signal Timings Page Table 7-2. Supported Signal Timings (continued)