Vidikron Vision 65, Vision 75 Install Lens Motor, AutoScope Lens Motor Installation

Installation

Install Lens Motor:

1.Position the AutoScope Lens Motor (item #2) as shown in Figure 3-7.

2.Line up the mounting holes on the lens motor housing with those on the underside of the projector.

3.Secure the motor to the projector with the four (4), supplied 10-32 x 1/2” Pan-Head Phillips screws (item #1) and nylon spacers (item #7).

4.Secure the AutoScope Ceiling Mount Adapters/Projector Stands to the motor using the two (2), supplied 10-32 x 1/4” Flat-Head Phillips screws (item #3).

Figure 3-7. AutoScope Lens Motor Installation

After you have installed the AutoScope lens motor, proceed with Mounting the Vision 65/75 on page 25.

22 Vidikron Vision Model 65/Model 75 Installation/Operation Manual