Frequently asked questions
What if … | Possible fault | Fix |
dishes are not clean? | The dishes were not | See, "Loading the |
| loaded correctly. | dishwasher". |
| The program was not | Select a more intensive |
| powerful enough. | program see, "Program |
|
| guide". |
| Not enough detergent | Use more detergent, see, |
| was dispensed. | "Adding detergent". |
| The spray arm jets are | Clean the spray arm jets, |
| clogged. | see, maintenance |
|
| instructions. |
| The triple filter is clogged | Clean and reseat the filter, |
| or not correctly seated. | see, maintenance |
|
| instructions. |
tea or lipstick stains | The wash temperature of | Select a program with a |
have not been | the selected program was | higher temperature. |
completely removed? | too low. |
|
| Not enough detergent | Use more detergent. |
| was used. |
|
white residue is visible | Not enough rinse aid was | Increase the dosage, |
on cutlery and dishes, | used. | see "Before using for the |
clouding occurs on |
| first time". |
glassware and film can | The salt reservoir is | Add reactivation salt, |
be wiped off? | empty. | see "Before using for the |
|
| first time". |
| The salt reservoir cap was | Reseat it making sure it |
| not correctly screwed on. | screws back on correctly. |
| The programmed setting | Adjust the setting of the |
| of the water softener is too | water softener , see |
| low. | "Before using for the first |
|
| time". |
there is a bluish sheen | The rinse aid dosage is | Reduce the dosage, see |
on the surface of | set too high. | "Before using for the first |
glasses and film can be |
| time". |
wiped off? |
|
|
glasses are dull and | Glasses are not | There is no remedy. |
discolored and film | dishwasher safe. | Only wash dishwasher |
cannot be wiped off? |
| safe glasses. |
41
