Frequently asked questions
What if … | Possible fault | Fix |
the "End", "Start" and | There may be a technical | – Turn the program |
"Top Solo" indicators | fault. | selector to "Stop". |
flash at the same time at |
| – Turn off the dishwasher. |
the end of a program? |
| A few seconds later: |
|
| |
|
| – Turn the dishwasher on. |
|
| – Select the desired |
|
| program. |
|
| – Press the "Start" button. |
|
| If the indicators flash |
|
| again, there is a technical |
|
| problem. |
|
| – Call the Miele Technical |
|
| Service Department. |
there is a knocking | The spray arm is hitting | Interrupt the program, |
noise in the wash | an item in the basket. | rearrange items blocking |
cabinet? |
| the spray arms. |
there is a rattling noise? | Items are not secure in | Interrupt the program and |
| the wash cabinet. | rearrange loose pieces. |
there is a knocking | This may be caused by | This has no effect on the |
noise in the water | the installation or the | dishwasher. If in doubt |
pipes? | diameter of pipe. | contact a plumber. |
the dishes are not dry, | The rinse aid setting may | Increase the dosage or |
glasses and cutlery are | be too low, or the rinse aid | refill the reservoir, see |
spotted? | reservoir is empty. | "Before using for the first |
|
| time". |
| Extended drying is not | Activate the Extended |
| activated. | drying feature. |
| Dishes were taken out too | Leave dishes in longer. |
| soon. |
|
40
