Vidikron Vision 65, Vision 75 Temp LED, POWER/STANDBY LED Indicates power status as follows

Controls and Functions

5.POWER/STANDBY LED Indicates power status as follows:

•Orange when the projector is in standby mode

•Flashes green for approximately 45 seconds after the projector is turned on to indicate that the lamp is warming up

•Green during normal operation

•Flashes orange for approximately 110 seconds after the projector is turned off to indicate that the lamp is cooling down

•Red when an internal failure requiring service has occurred

6.TEMP LED

Indicates fan status and internal temperature as follows:

•Off during normal operation

•Red when internal temperature is too high or a fan failure occurs

7.INTAKE VENT

8. VIDIKRON LOGO

The logo can be rotated to match the projector orientation: inverted (ceiling-mounted) or upright. To rotate the logo, grip it at the sides, pull it away from the projector and rotate it 180 degrees.

9.FRONT IR SENSOR

10.PROJECTION LENS

To adjust the focus, grasp the lens by the outer ring and rotate it.

6 Vidikron Vision Model 65/Model 75 Installation/Operation Manual