Gamut
| Settings |
|
| Manual | |
| White | x:312 | y:329 | Y:045 |
|
| Red | x:640 | y:330 | Y:015 |
|
| Green | x:300 | y:600 | Y:022 |
|
| Blue | x:150 | y:060 | Y:018 |
|
| D. White | x:312 | y:329 | Y:045 |
|
| Enter |
|
|
|
|
| Save |
|
|
|
|
| Color Temp. |
| 6500 |
| |
|
|
|
|
|
|
White | x:000 y:000 Y: 000 |
|
|
Changing either or both of these numbers changes the hue of the color and relocates the “triangle” for possible colors. For example, changing the x/y coordinates for red moves the color closer to either orange or violet, which in turn affects all displayed colors having a red component.
To perform these adjustments, you will need a color analyzer (Sencore
Note | ColorPro 5000 software and ColorPro III sensor, or equivalent). |
|
To adjust the gamut:
1.Select Gamut from the Advanced Options menu and press ENTER.
2.To do an automatic gamut adjustment, highlight “Enter” and press ENTER. If further calibration is necessary, continue with the next step.
3.Highlight “Settings” and press 
or 
to select “Manual.”
4.Highlight “White” and press ENTER. The Vision 65/75 displays a white field on the screen.
5.Using the color analyzer, measure the x and y coordinates for about 15 seconds. Make a note of the results.
6.Press EXIT or ENTER.
7.Highlight “White” and press 
.
8. Press ENTER to select the first digit of the x coordinate value for White (obtained in Step 5).
9.Press 
or 
repeatedly to set the digit.
10.Press 
to select the next digit; use the 
and 
buttons to change it.
11.Repeat Step 10 for the third digit.
12.Press ENTER.
13.Press 
to highlight the “y” coordinate value for White. Then, press ENTER to select the first digit.
14.Repeat Steps 9 through 12 to set the “y” coordinate value for White.
15.Press 
to highlight the “Y” coordinate value. Then press ENTER to select the first digit.
16.Repeat Steps 9 through 12 to set the “Y” coordinate value for White.
17.Press EXIT.
18. Repeat Steps 4 through 17 for Red, Green, Blue and D. White (Desired White).
19. Highlight “Save” and press ENTER.
To undo the effects of a previous calibration, highlight “Settings” and press 
or 
to select “Default.”
Reset to Defaults: To restore the ISF default image settings for the current input source ONLY, select Reset to Defaults and press the 
button to highlight “Yes.” Then, press ENTER.
62 | Vidikron Vision Model 65/Model 75 Installation/Operation Manual |
