Vidikron Vision 75 operation manual Connections to the Vision 65/75, Connecting Source

Installation

Proceed as follows to connect the Vision 65/75 to your video sources, external controller(s) – if present – and AC power.

When connecting your equipment:

•Turn off all equipment before making any connections.

•Use the correct signal cables for each source.

•Ensure that the cables are securely connected. Tighten the thumbscrews on connectors that have them.

3.6

Connections to the Vision 65/75

To access the connector panel, press	Connector Panel Access
the door release button so it pops out.
Turn the knob clockwise or
counter-clockwise and pull gently on it
to open the door.
Connect your video sources to the Vision 65/75 as shown and described in the sections that	Connecting Source
follow.	Components to the Vision
HDMI/DVI Connections: See Figure 3-10.With an HDMI source, use the included	65/75
HDMI-to-HDMI cable; with a DVI source, use the included DVI-to-HDMI cable.

Use the HDMI input whenever possible. This ensures the highest video

Tip quality because the signal is carried in the digital domain throughout the entire signal path, from source component output into the projector.

S-VID /

VID-S

HDMI or DVI Source(s) (BD/HD-DVD/DVD Player, HD Set Top Box, Game Console etc.)

Figure 3-10. HDMI/DVI Source Connections

Vidikron Vision Model 65/Model 75 Installation/Operation Manual 27