ProForm PFEL79907.1 user manual Avoid pinching Wires and cable during this step

4.Hook the front ends of the Frame Covers (105, 106) together. Attach each Frame Cover to the Frame (2) with three M4 x 16mm Self-tapping Screws (79).

5.Have a second person hold the Upright (6) near the Frame (2) as shown.

Pull the Wire Harness (48) and the Coaxial Cable (109) out of the Frame (2) and insert them upward through the Upright (6). Do not let the Wire Harness, the Coaxial Cable, or the Pulse Wire (110) fall into the Upright; use a piece of tape or an elastic band to hold the wires in place until step 13.

Insert the Upright (6) into the Frame (2). Attach the Upright with three M8 x 16mm Patch Screws (95) and three Star Washers (100).

Avoid pinching the Wires (48, 110) and the Coaxial Cable (109) between the Upright and the Frame.

4
		106
79
2	79
105
5	110	109
		48
	6
		95
2	100
100	100
95	95

Avoid pinching

the wires and cable during this step

7