ProForm PFEL79907.1 user manual Repeat this step for the Right Handlebar not shown

8.Attach Inner and Outer Handlebar Covers (18,

19) around the Left Handlebar (8) with three M4 x 16mm Self-tapping Screws (79) and an M4 x 13mm Washer (93). Start all three Self-tapping Screws before tightening any of them.

Repeat this step for the Right Handlebar (not shown).

8

79

	8
		18
19	93	79

9. Apply a generous amount of grease to the	9
Pivot Axle (65), and insert the Pivot Axle into the
Frame (2).
Attach each Frame Cover (17) to the Frame (2)			2
with two M4 x 16mm Screws (86).		Grease	65
		17	17
	86
10. Apply a small amount of grease to both sides of	10
a Wave Washer (98). Slide the Wave Washer
onto the left end of the Pivot Axle (65). Next,			9
slide the Left Handlebar (8) onto the Pivot Axle
as shown. Attach the Left Handlebar with an
M10 x 23mm Shoulder Screw (80) and an		8
M10 x 20mm x 1mm Washer (81).			98
Repeat this step for the Right Handlebar (9).
	81		65
	80		Grease
	9