Bionaire BSF16 Operating Instructions, Adjustment Instructions, Final Assembly, Tilt Adjustment

Step 9. Place the grill ring around the edges of both grills making sure to enclose both edges with the ring. Then re-attach the Bionaire® decorative cap, by passing the screw through the hole on the side of the cap and using your screwdriver tighten the grill ring together until the fan head assembly is completely secure.

FINAL ASSEMBLY

Step 1. Insert the extension pole into the lower pole. Insert the two brackets (Parts R and S) into the top of the lower pole. Make sure to align the two rectangular plastic tabs with groove inside the pole. Slide the brackets down until the pole cover is completely inserted into the lower pole.

Step 2. Once inserted, tighten the screw on the top bracket until it is secure. Then tighten the height adjustment knob to your desired height (see below instructions for height adjustment).

Step 3. Pass the power cord though the power cord clip to secure it into place.

OPERATING INSTRUCTIONS

Step 1. Set the fan base on a dry, level surface.

Step 2. Please make sure the Speed Control Knob is in the "Off" position. Plug the cord into any standard 120V AC outlet.

Step 3. The SPEED is adjusted by moving the knob left or right to the desired speed setting. The speeds are indicated by the numbers 1 for Low, 2 for Medium, and 3 for High.

Step 4. The OSCILLATION Knob is located on the bottom of the fan motor housing. To start oscillation, pull knob down. To stop oscillation, push knob up.

ADJUSTMENT INSTRUCTIONS

TILT ADJUSTMENT

Step 1. To change the tilting angle of the fan head, move the fan head to the desired angle.

HEIGHT ADJUSTMENT

Step 1. Turn the height adjustment knob counter-clockwise and slide the fan up or down to the desired position. Once you have reached your desired height, turn the knob clockwise to lock into position.

4