Intel MB896 user manual PNP/PCI Configurations

BIOS SETUP

PNP/PCI Configurations

This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value.

Phoenix - AwardBIOS CMOS Setup Utility

PnP/PCI Configurations

Init Display First	PCI Slot	ITEM HELP
Reset Configuration Data	Disabled
		Menu Level
Resources Controlled By	Auto (ESCD)	Select Yes if you are
IRQ Resources	Press Enter
		using a Plug and Play
PCI/VGA Palette Snoop	Disabled	capable operating
		system Select No if
INT Pin 1 Assignment	Auto
		you need the BIOS to
INT Pin 2 Assignment	Auto
		configure non-boot
	Auto
INT Pin 3 Assignment		devices
INT Pin 4 Assignment	Auto
INT Pin 5 Assignment	Auto
INT Pin 6 Assignment	Auto
INT Pin 7 Assignment	Auto
INT Pin 8 Assignment	Auto
**PCI Express relative items**
Maximum Payload Size	4096

Init Display First

The default setting is PCI Card.

Reset Configuration Data

This field allows you to determine whether to reset the configuration data or not. The default value is Disabled.

Resources Controlled by

This PnP BIOS can configure all of the boot and compatible devices with the use of a PnP operating system such as Windows 95.

PCI/VGA Palette Snoop

Some non-standard VGA display cards may not show colors properly. This field allows you to set whether or not MPEG ISA/VESA VGA cards can work with PCI/VGA. When this field is enabled, a PCI/VGA can work with an MPEG ISA/VESA VGA card. When this field is disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card.

Maximum Payload Size

The default setting of the PCI Express Maximum Payload Size is 4096.

MB896 User’s Manual 43