Intel MB890 user manual Power Management Setup, Power Supply Type, ACPI Function

BIOS SETUP

Power Management Setup

The Power Management Setup allows you to save energy of your system effectively.

Phoenix - AwardBIOS CMOS Setup Utility

Power Management Setup

Power-Supply Type	ATX
ACPI Function	Enabled
Power Management	User Define
Video Off Method	V/H SYNC+Blank
Video Off In Suspend	Yes
Suspend Type	Stop Grant
Modem Use IRQ	3
Suspend Mode	Disabled
HDD Power Down	Disabled
Soft-Off by PWR-BTTN	Instant-Off
CPU THRM-Throttling	50%
Wake-Up by PCI Card	Disabled
Power On by Ring	Disabled
Resume by Alarm	Disabled
Date (of Month) Alarm	0
Time (hh:mm:ss) Alarm	0 : 0 : 0
** Reload Global Timer Events **	Enabled
Primary IDE 0
Primary IDE 1	Enabled
Secondary IDE 0	Enabled
Secondary IDE 1	Enabled
FDD, COM, LPT Port	Enabled
PCI PIRQ[A-D] #	Enabled

ITEM HELP

Menu Level >

Power Supply Type

Use this field to select the power supply type used in the system. The default setting is ATX.

ACPI Function

Enable this function to support ACPI (Advance Configuration and Power Interface).

Power Management

This field allows you to select the type of power saving management modes. There are four selections for Power Management.

Min. Power Saving	Minimum power management
Max. Power Saving	Maximum power management.
User Define	Each of the ranges is from 1 min. to
	1hr. Except for HDD Power Down
	which ranges from 1 min. to 15 min.

MB890 User’s Manual 39