Intel XP-P5IM800GV user manual Installation of Memory

Page 11

2.Align the four fasteners of the fan sink with the four holes around the CPU socket. Push down each fastener and you should hear a "click" when the fastener is attached. Make sure the four fasteners are attached securely.

Prior to installation of the fan sink, check the direction of each fastener by the arrow engraved on fastener top. Before attaching the fasteners, turn each fastener clockwise. To uninstall the fan sink, release each fastener by rotating the fastener along the direction of the arrows and pull them up.

3.Connect the 4-wire power cable of the fan sink to the CPU_FAN header on the motherboard to complete the installation.

English

2.2.Installation of Memory

1.Before installing or removing memory, please make sure that the computer power is turned off to prevent hardware damage.

2.Please make sure that the memory used is supported by the motherboard.

3.Memory modules have a foolproof insertion design. The memory can be in stalled only when facing the correct position. If you cannot insert the module, please switch directions.

4.It is recommended that memory of similar capacity, specifications and brand be used.

The motherboard supports DIMM memory modules, whereby BIOS will automatically detect memory capacity and specifications. Memory modules are designed so that they can be inserted only in one direction.

1. Unfasten the clips on each end of the memory slots. Correctly align the memory module in the slot and push downwards..

2. Once the memory module is correctly inserted, the

clips will automatically refasten. If the memory module is positioned in the wrong direction, it will not insert. If this occurs, please switch directions.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents XP-P5IM800GV Terms of Use Copyright Declaration Legal DisclaimerContents P5IM800GV Motherboard LayoutProduct Introduction Feature SummaryIDE1 / IDE2 IDE1 and IDE2 Connector I/O Back Panel and Connectors&Jumper SettingFDD Floppy Disk Drive Connector Fpanel Front Panel Control Connector ATX12V +12V Power ConnectorATX ATX Power Connector FUSB1 Front USB Connector SATA0/SATA1 Serial ATA Connector, controlled by ICH5Faudio Front Audio Connector Cdin Optical Drive Audio ConnectorClrcmos Clear Cmos Hardware InstallationBATBattery Installation of a LGA775 CPU Installation of a LGA775 Pentium 4 CPU and Fan SinkInstallation of Memory Flexibility Installation of the Graphics CardWhat is Axpers A.G.U.? Advantages of Axpers A.G.U PerformanceElsa English Setup Screen Features Bios version F3 Bios SetupTime hhmmss Standard Cmos FeaturesDate mmddyy Halt on IDE Channel 2/3 Master IDE Device SetupFloppy 3 Mode Support Drive A/BAdvanced Bios Features Integrated Peripherals Parallel Mode Sata Port0 configure as Set Sata ModeSata Port1 configure as Power on Function Onboard Serial PortPower Management Setup PnP/PCI Configuration PC Health Status Memory Frequency Mhz Frequency/Voltage ControlCPU Clock Ratio Memory Frequency ForSave & Exit Setup Load Fail-Safe DefaultsLoad Optimized Defaults Set User PasswordDriver Installation

XP-P5IM800GV specifications

The Intel XP-P5IM800GV motherboard is a notable piece of hardware in the realm of computer technology, specifically designed to support the Intel Pentium 4 and Celeron processors. With its introduction, it offered a blend of performance, reliability, and essential features, making it an attractive choice for many users looking for a solid foundation for their systems.

One of the key features of the XP-P5IM800GV is its chipset, the Intel 865G, which supports Intel’s Hyper-Threading technology, allowing for better multitasking and improved performance in applications that can leverage multiple threads. This chipset also includes integrated Intel Graphics Media Accelerator 900, enabling users to enjoy decent graphics performance without the need for a discrete graphics card, ideal for basic gaming and multimedia tasks.

The motherboard supports a range of front-side bus speeds, specifically up to 800 MHz, providing enhanced data transfer rates essential for modern computing tasks. With support for DDR memory, it can accommodate up to 4 GB of RAM, enabling users to run multiple applications smoothly without significant slowdowns. Furthermore, the board supports dual-channel memory architecture, which helps in boosting memory bandwidth and overall system performance.

In terms of connectivity, the XP-P5IM800GV features multiple USB 2.0 ports, allowing for easy connection of peripheral devices. It also includes a Gigabit Ethernet port for high-speed internet access and networking capabilities. The motherboard incorporates integrated audio capabilities, simplifying multimedia usage by providing 5.1 channel surround sound support, catering to users looking for a complete audio experience without requiring additional sound cards.

Storage options are generous, with ATA/133 interfaces available for connecting hard drives, providing sufficient speed for typical data transfer tasks. Additionally, the board supports Serial ATA, which further increases the adaptability and future-proofing of the system. The board also includes various expansion slots, such as PCI and AGP slots, allowing users to add graphics cards and other expansion cards for specific functionalities.

The Intel XP-P5IM800GV motherboard embodies a combination of solid performance, essential features, and future-ready technologies, making it an excellent choice for everyday computing and multimedia applications. Its design prioritizes stability and user-friendliness, appealing to both novice and experienced users who seek reliable performance in their desktop setups.
Top Page Image Contents