Intel XP-P5IM800GV user manual Hardware Installation, Clrcmos Clear Cmos, BATBattery

Page 9

CLR_CMOS (Clear CMOS)

You can clear the motherboard CMOS with the jumper to return your system to its initial status. To prevent improper usage, the jumper does not include the jumper plug. If you wish to use the Clear CMOS function, please short circuit the 1-2 Pin.

1

Open : Normal

1

Short : Clear CMOS

 

 

BAT(Battery)

The improper removal of the battery can result in harm. When replacing a battery, please make sure you use one that is of similar brand and model number.

For information related to battery specifications and precautions, please refer to the manufacturer instructions.

If you wish to delete the data stored in the CMOS, please follow the steps below:

1.Please turn off your computer and unplug the power.

2.Remove the battery from the motherboard.

3.Wait 10 minutes and then replace the battery onto the motherboard.

4.Plug in the power supply and turn on your system.

2.Hardware Installation

1.Please make sure that the CPU used is supported by your motherboard.

2.Please be aware of the placement position of the CPU. If the CPU does not insert properly, do not apply force but check the placement position.

3.Please make sure that an even layer of heat sink paste is added between the CPU and the fan sink.

4.Please do not turn on the power prior to installing the fan sink. Doing so can result in overheating and lead to permanent damage to the CPU.

5.Please follow the CPU specifications when setting the frequency. It is not recommended that system speed settings exceed that of hardware specifications. If you wish to set your system speed to exceed the recom mended specifications, please check your hardware specifications eg: CPU, graphics card, memory, hard drive

The following must be supported to allow the use of Hyper-Threading Technology:

-an Intel Pentium 4 CPU with HT

-a motherboard supporting HT

-HT selection feature within BIOS

-an operating system supporting HT

English

9

Image 9
Contents XP-P5IM800GV Terms of Use Copyright Declaration Legal DisclaimerContents P5IM800GV Motherboard LayoutProduct Introduction Feature SummaryI/O Back Panel and Connectors&Jumper Setting FDD Floppy Disk Drive ConnectorIDE1 / IDE2 IDE1 and IDE2 Connector ATX12V +12V Power Connector ATX ATX Power ConnectorFpanel Front Panel Control Connector Faudio Front Audio Connector SATA0/SATA1 Serial ATA Connector, controlled by ICH5Cdin Optical Drive Audio Connector FUSB1 Front USB ConnectorHardware Installation BATBatteryClrcmos Clear Cmos Installation of a LGA775 CPU Installation of a LGA775 Pentium 4 CPU and Fan SinkInstallation of Memory What is Axpers A.G.U.? Installation of the Graphics CardAdvantages of Axpers A.G.U Performance FlexibilityElsa English Setup Screen Features Bios version F3 Bios SetupStandard Cmos Features Date mmddyyTime hhmmss Floppy 3 Mode Support IDE Channel 2/3 Master IDE Device SetupDrive A/B Halt onAdvanced Bios Features Integrated Peripherals Sata Port1 configure as Sata Port0 configure as Set Sata ModePower on Function Onboard Serial Port Parallel ModePower Management Setup PnP/PCI Configuration PC Health Status CPU Clock Ratio Frequency/Voltage ControlMemory Frequency For Memory Frequency MhzLoad Optimized Defaults Load Fail-Safe DefaultsSet User Password Save & Exit SetupDriver Installation

XP-P5IM800GV specifications

The Intel XP-P5IM800GV motherboard is a notable piece of hardware in the realm of computer technology, specifically designed to support the Intel Pentium 4 and Celeron processors. With its introduction, it offered a blend of performance, reliability, and essential features, making it an attractive choice for many users looking for a solid foundation for their systems.

One of the key features of the XP-P5IM800GV is its chipset, the Intel 865G, which supports Intel’s Hyper-Threading technology, allowing for better multitasking and improved performance in applications that can leverage multiple threads. This chipset also includes integrated Intel Graphics Media Accelerator 900, enabling users to enjoy decent graphics performance without the need for a discrete graphics card, ideal for basic gaming and multimedia tasks.

The motherboard supports a range of front-side bus speeds, specifically up to 800 MHz, providing enhanced data transfer rates essential for modern computing tasks. With support for DDR memory, it can accommodate up to 4 GB of RAM, enabling users to run multiple applications smoothly without significant slowdowns. Furthermore, the board supports dual-channel memory architecture, which helps in boosting memory bandwidth and overall system performance.

In terms of connectivity, the XP-P5IM800GV features multiple USB 2.0 ports, allowing for easy connection of peripheral devices. It also includes a Gigabit Ethernet port for high-speed internet access and networking capabilities. The motherboard incorporates integrated audio capabilities, simplifying multimedia usage by providing 5.1 channel surround sound support, catering to users looking for a complete audio experience without requiring additional sound cards.

Storage options are generous, with ATA/133 interfaces available for connecting hard drives, providing sufficient speed for typical data transfer tasks. Additionally, the board supports Serial ATA, which further increases the adaptability and future-proofing of the system. The board also includes various expansion slots, such as PCI and AGP slots, allowing users to add graphics cards and other expansion cards for specific functionalities.

The Intel XP-P5IM800GV motherboard embodies a combination of solid performance, essential features, and future-ready technologies, making it an excellent choice for everyday computing and multimedia applications. Its design prioritizes stability and user-friendliness, appealing to both novice and experienced users who seek reliable performance in their desktop setups.