Intel XP-P5CM-GV Hardware Installation, Installation of a LGA775 Pentium 4 CPU and Fan Sink

Page 10

English

2.Hardware Installation

1.Please make sure that the CPU used is supported by your motherboard.

2.Please be aware of the placement position of the CPU. If the CPU does not insert properly, do not apply force but check the placement position.

3.Please make sure that an even layer of heat sink paste is added between the CPU and the fan sink.

4.Please do not turn on the power prior to installing the fan sink. Doing so can result in overheating and lead to permanent damage to the CPU.

5.Please follow the CPU specifications when setting the frequency. It is not recommended that system speed settings exceed that of hardware specifications. If you wish to set your system speed to exceed the recom mended specifications, please check your hardware specifications eg: CPU, graphics card, memory, hard drive

The following must be supported to allow the use of Hyper-Threading Technology:

-an Intel Pentium 4 CPU with HT

-a motherboard supporting HT

-HT selection feature within BIOS

-an operating system supporting HT

2.1.Installation of a LGA775 Pentium 4 CPU and Fan Sink

2.1.1.Installation of a LGA775 CPU

1. Push the socket lever arm down and away from the CPU socket and raise it up completely.

2. Open the load plate and gently remove the plastic cover.

3.Hold the CPU with your thumb and index fingers (do not touch the bottom of the CPU when holding it).

Align notchs on the two sides of the CPU with the small sockets of the CPU socket and place the CPU straight down.

10

Image 10
Contents XP-P5CM-GV/ XP-P5CM-GL Copyright Declaration Legal Disclaimer Terms of UseContents Motherboard Layout P5CM-XPFeature Summary Product IntroductionFDD Floppy Disk Drive Connector I/O Back Panel and Connectors&Jumper SettingIDE IDE Connector ATX12V +12V Power Connector ATX ATX Power ConnectorFaudio Front Audio Connector Fpanel Front Panel Control ConnectorSATA0/SATA2 Serial ATA Connector, controlled by ICH6 Cdin Optical Drive Audio ConnectorBATBattery FUSB1 Front USB ConnectorSurcen Surround Center Connector Clrcmos Clear CmosHardware Installation Installation of a LGA775 Pentium 4 CPU and Fan SinkInstallation of Fan Sink Installation of Memory Installation of the Graphics Card What is Axpers G.E.A.R.?GV-GF3200TF GV-NX66T128VP English Bios Setup Setup Screen Features Bios versionF1IDE Channel 2 MasterSlave IDE Device Setup Standard Cmos FeaturesIDE Channel 0 MasterSlave IDE Device Setup Date mmddyyHalt on Floppy 3 Mode SupportDrive A/B MemoryAdvanced Bios Features Integrated Peripherals ECP Mode Use DMA OnBoard LAN Boot ROM Onboard Serial PortParallel Mode Pata IDE Set toPower Management Setup PnP/PCI Configuration PC Health Status Memory Frequency For Frequency/Voltage ControlCPU Clock Ratio Memory Frequency MhzSet User Password Load Fail-Safe DefaultsLoad Optimized Defaults Save & Exit SetupDriver Installation

XP-P5CM-GL, XP-P5CM-GV specifications

The Intel XP-P5CM-GV and XP-P5CM-GL are notable motherboards from Intel's lineup, designed to accommodate the needs of users seeking reliability and performance in their computing setups. These motherboards are based on the Pentium II architecture and are aimed at providing solid support for a wide range of applications.

One of the standout features of the XP-P5CM-GV and XP-P5CM-GL is their support for Intel Slot 1 processors. This allows users to utilize various Pentium II CPUs, enabling a flexible and upgradeable computing environment. By leveraging the capabilities of these processors, users can achieve enhanced performance in both multitasking and demanding applications.

In terms of memory, both motherboards support SDRAM, providing users with a maximum capacity of 512 MB. This is particularly beneficial for running memory-intensive applications and ensures smoother performance during tasks such as video editing or graphic design. The compatibility with PC100 SDRAM is especially noteworthy, as it supports higher memory bandwidth, contributing to the overall efficiency and responsiveness of the system.

The XP-P5CM-GV and XP-P5CM-GL include integrated graphics capabilities, which are essential for users who require basic visual performance without needing a dedicated graphics card. This feature makes these motherboards ideal for budget-conscious users or those who do not engage in graphics-heavy tasks.

Connectivity options are also a highlight of these motherboards. With multiple PCI slots, users can easily expand their systems by adding additional cards such as sound cards, network cards, or even additional graphical processing units for enhanced performance. The onboard IDE controllers also provide support for connecting a variety of storage devices, ensuring that users have the flexibility to configure their systems to meet their specific needs.

Both motherboards feature ATX form factors, making them compatible with a wide array of cases and power supplies available in the market. This compatibility facilitates ease of installation and builds, allowing users to create their ideal system without compatibility concerns.

In conclusion, the Intel XP-P5CM-GV and XP-P5CM-GL motherboards deliver a compelling blend of performance, expandability, and integrated features. With support for Intel's Slot 1 processors, ample memory capabilities, integrated graphics, and extensive connectivity options, these motherboards remain a solid choice for users looking to build or upgrade their systems. Their design reflects Intel's commitment to delivering quality solutions in the computing landscape.