Intel D845PESV Revision Revision History, FCC Declaration of Conformity Date, Disclaimer

Page 2

Revision History

Revision

Revision History

-001

First release of the Intel® Desktop Board D845PESV Product Guide.

-002

Second release of the Intel Desktop Board D845PESV Product Guide.

If an FCC declaration of conformity marking is present on the board, the following statement applies:

FCC Declaration of Conformity

Date

July 2002

August 2002

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For questions related to the EMC performance of this product, contact:

Intel Corporation

5200 N.E. Elam Young Parkway Hillsboro, OR 97124 1-800-628-8686

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment to an outlet on a circuit other than the one to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Compliance Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

Le présent appareil numerique német pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe B prescrites dans le Réglement sur le broullage radioélectrique édicté par le ministére des Communications du Canada.

Disclaimer

Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or

otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.

Desktop Board D845PESV may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an ordering number and are referenced in this document, or other Intel literature, may be obtained from Intel Corporation by going to the World Wide Web site at: http://www.intel.com/ or by calling 1-800-548-4725.

Intel, Pentium, and Celeron are registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

Other names and brands may be claimed as the property of others. Copyright © 2002, Intel Corporation. All rights reserved.

Image 2
Contents Intel Desktop Board D845PESV Product Guide FCC Declaration of Conformity Date Revision HistoryRevision Revision History Canadian Department of Communications Compliance StatementContents Updating the Bios Intel Desktop Boards D845PESV Product GuideContents Technical ReferenceTables Form Factor Processor Desktop Board FeaturesFeature Summary Memory Chipset Control Audio LAN optionalPeripheral Interfaces Expansion Capabilities Power ManagementIntel Desktop Board D845PESV Product Guide Hardware ManagementDesktop Board Features ComponentsProcessor Supported ProcessorsMain Memory FSBIntel 82801DB I/O Controller Hub ICH4 Intel 845PE ChipsetIntel 82845PE Memory Controller Hub MCH Firmware Hub FWHLAN Subsystem Optional Input/Output I/O ControllerAudio Subsystem LAN Subsystem SoftwareHi-Speed USB 2.0 Support RJ-45 LAN Connector LEDsRJ-45 LAN Connector LEDs Enhanced IDE InterfaceExpansion Slots PCI Auto ConfigurationIDE Auto Configuration Accelerated Graphics Port AGPSuspend to RAM Instantly Available PC Technology Power Management FeaturesSecurity Passwords Power Connectors Hardware ManagementSpeaker Battery Real-Time ClockIntel Desktop Board D845PESV Product Guide Installing and Replacing Desktop Board Components Before You BeginInstalling the I/O Shield Installing the I/O ShieldInstalling and Removing the Desktop Board Installing and Replacing Desktop Board ComponentsInstalling the Processor Fan Heat Sink Installing and Removing a ProcessorInstalling a Processor Connecting the Processor Fan Heat Sink Cable Removing the ProcessorInstalling and Removing Memory Installing DIMMsInstalling and Removing an AGP Card Removing DIMMsInstalling an AGP Card Removing the AGP CardConnecting the IDE Cable Connecting the IDE CableConnecting Front Panel Headers Item DescriptionFront Panel Audio Header Signal Names J8A1 Connecting the Front Panel HeaderInstalling a Front Panel Audio Solution Front Panel Header J9G1Installing a Front Panel USB Solution Front Panel USB 2.0 Header J9F1Connecting Power Cables Connecting Fans and Power CablesConnecting Fans Jumper Setting Mode Setting the Bios Configuration Jumper BlockJumper Settings for the Bios Setup Program Modes J9H2 Clearing Passwords Replacing the Battery PrecautionVorsicht Removing the Battery Updating the Bios Updating the Bios with the Intel Express Bios Update UtilityObtaining the Bios Update File Updating the BiosRecovering the Bios Updating the BiosIntel Desktop Board D845PESV Product Guide Shows the Bios Setup program menu bar Using the Bios Setup ProgramSetup screen menu bar is shown below Bios Setup Program Menu BarMaintenance Maintenance MenuBios Setup Program Function Keys Maintenance MenuMain Menu Main MenuMain Advanced Menu Advanced MenuAdvanced PCI Configuration PCI Configuration SubmenuPCI Configuration Submenu Options Auto default DescriptionBoot Configuration Boot Configuration SubmenuBoot Configuration Submenu Options No defaultPeripheral Configuration Submenu Peripheral Configuration SubmenuEnabled default Options DefaultIRQ 7 default Enabled default DescriptionIDE Configuration IDE Configuration SubmenuIDE Configuration Submenu Both defaultAdvanced Security Sectors default Auto defaultPrimary/Secondary IDE Master/Slave Submenus Primary/Secondary IDE Master/Slave SubmenusOptions Auto default Diskette Configuration Submenu Diskette Configuration SubmenuThis submenu shown in is used to configure the floppy drive Diskette ConfigurationEvent Log Configuration Event Log Configuration SubmenuEvent Log Configuration Submenu Video Configuration Submenu Video Configuration SubmenuSubmenu shown in is used to configure video features USB Configuration Submenu USB Configuration SubmenuMenu shown in is used to configure USB features USB ConfigurationChipset Configuration Chipset Configuration SubmenuChipset Configuration Submenu Auto default DescriptionFull default If no password entered previously FeatureYes default Security MenuSubmenu represented in is for setting the Acpi features Power MenuMenu shown in is used to set power management features Acpi SubmenuBoot Menu Boot MenuBoot Submenu shown in is for setting hard disk drives Boot Device Priority SubmenuSubmenu represented in is for setting boot devices priority Hard Disk Drives SubmenuRemovable Devices Submenu Submenu in shown is for setting removable devicesSubmenu shown in is for setting Atapi CD-ROM drives Atapi CD-ROM DrivesExit Menu Exit MenuBoard Connectors Technical ReferenceBack Panel Connectors Description ColorShows the location of the audio connectors Audio ConnectorsAdd-In Card and Peripheral Interface Connectors Shows the add-in card and peripheral interface connectorsDMA Channels Desktop Board ResourcesMemory Map System Memory MapInterrupts InterruptsBeep Codes Error Messages and IndicatorsBios Beep Codes Number of Beeps DescriptionError Message Bios Error MessagesBios Error Messages ExplanationError Messages and Indicators Intel Desktop Board D845PESV Product Guide Regulatory Compliance Safety RegulationsSafety Regulations EMC RegulationsProduct Certification Markings Ensure Electromagnetic Compatibility EMC Compliance Installation PrecautionsInstallation Instructions Regulatory ComplianceChassis and Component Certifications Prevent Power Supply OverloadPlace Battery Marking Use Only for Intended Applications