Intel D845PESV manual Boot Device Priority Submenu, Hard Disk Drives Submenu

Page 62

Intel Desktop Board D845PESV Product Guide

Boot Device Priority Submenu

Maintenance Main Advanced Security Power

Boot

Exit

Boot Device Priority

Hard Disk Drives

Removable Devices

ATAPI CD-ROM Drives

The submenu represented in Table 27 is for setting boot devices priority.

Table 27. Boot Device Priority Submenu

Feature

1st Boot Device

2nd Boot Device

3rd Boot Device

Options

•Removable Device

•Hard Drive

•ATAPI CD-ROM

•Disabled

Description

Specifies the boot sequence from the available devices. To specify boot sequence:

1.Select the boot device with <↑ > or <↓ >.

2.Press <Enter> to set the selection as the intended boot device.

The operating system assigns a drive letter to each boot device in the order listed. Changing the order of the devices changes the drive lettering. The default settings for the first through final boot devices are, respectively listed below. The BIOS supports up to sixteen total boot devices in any combination of the boot device types below, with respect to these maximums per type.

•Removable Device (maximum of four).

•Hard Drive (maximum of 12).

•ATAPI CD-ROM (maximum of four).

Hard Disk Drives Submenu

Maintenance Main Advanced Security Power

The submenu shown in Table 28 is for setting hard disk drives.

Table 28. Hard Disk Drives Submenu

	Boot		Exit

Boot Device Priority

Hard Disk Drives

Removable Devices

ATAPI CD-ROM Drives

Feature

1st Hard Disk Drive

(Note)

Options	Description
Dependent on installed	Specifies the boot sequence from the available hard disk
hard drives	drives. To specify boot sequence:
	1.	Select the boot device with <↑ > or <↓ >.
	2.	Press <Enter> to set the selection as the intended
		boot device.

Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will display up to twelve hard disk drives, the maximum number of hard disk drives supported by the BIOS.

62

Image 62

Contents Intel Desktop Board D845PESV Product Guide FCC Declaration of Conformity Date Revision HistoryRevision Revision History Canadian Department of Communications Compliance StatementContents Updating the Bios Intel Desktop Boards D845PESV Product GuideContents Technical ReferenceTables Form Factor Processor Desktop Board FeaturesFeature Summary Memory Chipset Control Audio LAN optionalPeripheral Interfaces Expansion Capabilities Power ManagementIntel Desktop Board D845PESV Product Guide Hardware ManagementDesktop Board Features ComponentsProcessor Supported ProcessorsMain Memory FSBIntel 82801DB I/O Controller Hub ICH4 Intel 845PE ChipsetIntel 82845PE Memory Controller Hub MCH Firmware Hub FWHLAN Subsystem Optional Input/Output I/O ControllerAudio Subsystem LAN Subsystem SoftwareHi-Speed USB 2.0 Support RJ-45 LAN Connector LEDsRJ-45 LAN Connector LEDs Enhanced IDE InterfaceExpansion Slots PCI Auto ConfigurationIDE Auto Configuration Accelerated Graphics Port AGPSuspend to RAM Instantly Available PC Technology Power Management FeaturesSecurity Passwords Power Connectors Hardware ManagementSpeaker Battery Real-Time ClockIntel Desktop Board D845PESV Product Guide Installing and Replacing Desktop Board Components Before You BeginInstalling the I/O Shield Installing the I/O ShieldInstalling and Removing the Desktop Board Installing and Replacing Desktop Board ComponentsInstalling the Processor Fan Heat Sink Installing and Removing a ProcessorInstalling a Processor Connecting the Processor Fan Heat Sink Cable Removing the ProcessorInstalling and Removing Memory Installing DIMMsInstalling and Removing an AGP Card Removing DIMMsInstalling an AGP Card Removing the AGP CardConnecting the IDE Cable Connecting the IDE CableConnecting Front Panel Headers Item DescriptionFront Panel Audio Header Signal Names J8A1 Connecting the Front Panel HeaderInstalling a Front Panel Audio Solution Front Panel Header J9G1Installing a Front Panel USB Solution Front Panel USB 2.0 Header J9F1Connecting Power Cables Connecting Fans and Power CablesConnecting Fans Jumper Setting Mode Setting the Bios Configuration Jumper BlockJumper Settings for the Bios Setup Program Modes J9H2 Clearing Passwords Replacing the Battery PrecautionVorsicht Removing the Battery Updating the Bios Updating the Bios with the Intel Express Bios Update UtilityObtaining the Bios Update File Updating the BiosRecovering the Bios Updating the BiosIntel Desktop Board D845PESV Product Guide Shows the Bios Setup program menu bar Using the Bios Setup ProgramSetup screen menu bar is shown below Bios Setup Program Menu BarMaintenance Maintenance MenuBios Setup Program Function Keys Maintenance MenuMain Menu Main MenuMain Advanced Menu Advanced MenuAdvanced PCI Configuration PCI Configuration SubmenuPCI Configuration Submenu Options Auto default DescriptionBoot Configuration Boot Configuration SubmenuBoot Configuration Submenu Options No defaultPeripheral Configuration Submenu Peripheral Configuration SubmenuEnabled default Options DefaultIRQ 7 default Enabled default DescriptionIDE Configuration IDE Configuration SubmenuIDE Configuration Submenu Both defaultAdvanced Security Sectors default Auto defaultPrimary/Secondary IDE Master/Slave Submenus Primary/Secondary IDE Master/Slave SubmenusOptions Auto default Diskette Configuration Submenu Diskette Configuration SubmenuThis submenu shown in is used to configure the floppy drive Diskette ConfigurationEvent Log Configuration Event Log Configuration SubmenuEvent Log Configuration Submenu Video Configuration Submenu Video Configuration SubmenuSubmenu shown in is used to configure video features USB Configuration Submenu USB Configuration SubmenuMenu shown in is used to configure USB features USB ConfigurationChipset Configuration Chipset Configuration SubmenuChipset Configuration Submenu Auto default DescriptionFull default If no password entered previously FeatureYes default Security MenuSubmenu represented in is for setting the Acpi features Power MenuMenu shown in is used to set power management features Acpi SubmenuBoot Menu Boot MenuBoot Submenu shown in is for setting hard disk drives Boot Device Priority SubmenuSubmenu represented in is for setting boot devices priority Hard Disk Drives SubmenuRemovable Devices Submenu Submenu in shown is for setting removable devicesSubmenu shown in is for setting Atapi CD-ROM drives Atapi CD-ROM DrivesExit Menu Exit MenuBoard Connectors Technical ReferenceBack Panel Connectors Description ColorShows the location of the audio connectors Audio ConnectorsAdd-In Card and Peripheral Interface Connectors Shows the add-in card and peripheral interface connectorsDMA Channels Desktop Board ResourcesMemory Map System Memory MapInterrupts InterruptsBeep Codes Error Messages and IndicatorsBios Beep Codes Number of Beeps DescriptionError Message Bios Error MessagesBios Error Messages ExplanationError Messages and Indicators Intel Desktop Board D845PESV Product Guide Regulatory Compliance Safety RegulationsSafety Regulations EMC RegulationsProduct Certification Markings Ensure Electromagnetic Compatibility EMC Compliance Installation PrecautionsInstallation Instructions Regulatory ComplianceChassis and Component Certifications Prevent Power Supply OverloadPlace Battery Marking Use Only for Intended Applications