Intel D102GGC2 manual Desktop Board Features, Feature Summary, Form Factor

Page 9

1 Desktop Board Features

This chapter briefly describes the main features of Intel® Desktop Board D102GGC2. Table 1 summarizes the major features of the desktop board.

Table 1. Feature Summary

Form Factor

MicroATX (243.84 millimeters [9.60 inches] x 218.44 millimeters [8.60 inches])

 

 

Processor

Support for an Intel® processor in the LGA775 package

Main Memory

Two 240-pin SDRAM Dual Inline Memory Module (DIMM) sockets

 

533/400 MHz single channel DDR2 SDRAM interface

 

Designed to support up to 2 GB of system memory

 

 

Chipset

ATI RADEON* XPRESS 200

 

ATI RADEON XPRESS Northbridge

 

ATI IXP 450 Southbridge

 

 

Graphics

ATI RADEON XPRESS 200 Graphics with support for external graphics via a

 

PCI Express* x16 connector

 

 

 

Audio

ATI RADEON XPRESS 200 Chipset

 

High Definition Audio interface

 

Realtek* codec

 

 

 

Expansion Capabilities

Two PCI bus add-in card connectors

 

One PCI Express x16 connector

 

One PCI Express x1 connector

 

 

 

Peripheral Interfaces

Eight USB 2.0 ports

 

 

Four ports routed to the back panel

 

 

Four ports routed to two USB headers

 

Four Serial ATA (SATA) channels (1.5 Gb/s)

 

Two IDE interfaces with ATA-100 support (four devices)

 

One VGA connector

 

One diskette drive interface

 

One parallel port

 

One serial port

 

PS/2* keyboard and mouse ports

 

 

 

BIOS

Intel® BIOS

 

Support for SMBIOS

 

Intel® Rapid BIOS Boot

 

Intel® Express BIOS Update

Power Management

Support for Advanced Configuration and Power Interface (ACPI)

 

Suspend to RAM (STR)

 

Wake on USB, PCI, PCI Express, PS/2, LAN, and front panel

 

 

 

9

Image 9
Contents Intel Desktop Board D102GGC2 Product Guide Revision Revision History Date Revision HistoryFCC Declaration of Conformity Canadian Department of Communications Compliance StatementIntended Audience PrefaceIntended Uses Document OrganizationTerminology Box ContentsContents Error Messages and Indicators Tables ContentsViii Desktop Board Features Feature SummaryForm Factor Related Links Supported Operating SystemsDesktop Board Components Desktop Board FeaturesLabel Description Desktop Boards D102GGC2 ComponentsPlatform Compatibility Guide Power Supply Requirements Power Supply RequirementsProcessor Main MemoryATI RADEON* Xpress 200 Chipset Graphics SubsystemAudio Subsystem Input/Output I/O Controller LAN SubsystemLAN Subsystem Software RJ-45 10/100 Ethernet LAN Connector LEDs RJ-45 LAN Connector LEDsHi-Speed USB 2.0 Support LED State IndicatesPCI and PCI Express* Auto Configuration Serial ATA and IDE Auto ConfigurationEnhanced IDE Interface Serial ATASecurity Passwords Power Management FeaturesPower Connectors Chassis IntrusionSuspend to RAM Instantly Available PC Technology Fan ConnectorsWake from USB Location of the Standby Power IndicatorSpeaker BatteryReal-Time Clock Wake from PS/2 Keyboard/MouseIntel Desktop Board D102GGC2 Product Guide Before You Begin Installing and Replacing Desktop Board ComponentsInstallation Precautions Prevent Power Supply OverloadObserve Safety and Regulatory Requirements Installing and Replacing Desktop Board Components Installing the I/O ShieldDesktop Board D102GGC2 Mounting Screw Hole Locations Installing and Removing the Desktop BoardInstalling a Processor Installing and Removing a ProcessorRemove the Protective Socket Cover Install Processor Installing the Processor Fan Heat Sink Connecting the Processor Fan Heat Sink CableRemoving the Processor Installing DIMMs Installing and Removing MemoryDimm Removing DIMMs Installing a PCI Express x16 Card Installing and Removing a PCI Express x16 CardRemoving a PCI Express x16 Card Removing the PCI Express x16 CardConnecting the IDE Cable Connecting the IDE CableConnecting the Serial ATA Cable Connecting the Serial ATA Sata CableItem Description Connecting Internal HeadersInstalling a Front Panel Audio Solution AC ’97 Audio Header Signal NamesPin Signal Name Connecting the Front Panel Header Connecting Hi-Speed USB 2.0 HeadersHi-Speed USB 2.0 Header Signal Names Front Panel Header Signal NamesMulti-Channel Analog Audio Location of the Chassis Fan Headers Connecting Chassis Fan CablesConnecting 2 x 12 Power Supply Cables Connecting Power CablesLocation of Other Connectors on Desktop Board D102GGC2 Other ConnectorsLocation of the Bios Configuration Jumper Block Setting the Bios Configuration JumperClearing Passwords Jumper Settings for the Bios Setup Program ModesJumper Setting Mode Description Precaution Replacing the BatteryAvvertimento Awas Oсторога Removing the Battery Intel Desktop Board D102GGC2 Product Guide Updating the Bios Updating the Bios with the Iflash Memory Update UtilityObtaining the Bios Update File Recovering the Bios Updating the BiosBios Beep Codes Error Messages and IndicatorsBios Error Messages Bios Error MessagesIntel Desktop Board D102GGC2 Product Guide Place Battery Marking Safety RegulationsSafety Regulations Regulatory ComplianceEuropean Union Declaration of Conformity Statement Product Ecology Statements Recycling ConsiderationsRegulatory Compliance Français Lead-Free Board Markings Lead-Free Desktop BoardEMC Regulations EMC RegulationsEnsure Electromagnetic Compatibility EMC Compliance Product CertificationsBoard-Level Certification Markings Product Certification MarkingsEurope Chassis and Component Certifications

D102GGC2 specifications

The Intel D102GGC2 is a versatile and robust motherboard designed for the Intel LGA 775 socket, accommodating a variety of Intel processors including the Pentium, Celeron, and Core 2 Duo families. This motherboard is particularly noted for its solid performance and reliability, making it an excellent choice for both home and office environments.

One of its main features is support for up to 4GB of DDR2 RAM across its two DIMM slots, allowing users to enjoy improved multitasking capabilities and enhanced performance during demanding tasks. The motherboard supports dual-channel memory architecture, which further optimizes memory throughput and efficiency.

The D102GGC2 is equipped with an Intel 945GC chipset, known for its balanced performance in both processing and graphics capabilities. This chipset incorporates Intel Graphics Media Accelerator 950, providing decent integrated graphics performance for everyday computing needs, albeit less powerful than dedicated graphics cards. This feature is particularly beneficial for users who may not require high-end graphics performance for tasks like gaming or graphic design.

Storage options are abundant, with the motherboard featuring four SATA connectors to support modern hard drives and SSDs, allowing data transfer speeds of up to 3Gb/s. The incorporation of IDE support also means that users can connect legacy devices, making this motherboard versatile in accommodating older hardware.

Additional features include an array of USB ports, including USB 2.0 interfaces that support an external peripheral connection, crucial for today’s computing demands. The onboard Realtek ALC662 audio codec provides adequate sound quality for general use, making it suitable for multimedia applications as well.

From a networking perspective, the Intel D102GGC2 includes a 10/100 Ethernet port for reliable wired connectivity. This makes this motherboard an attractive option for users who prioritize stable network access, particularly in environments where wireless connections may be unreliable.

In terms of form factor, the D102GGC2 adheres to the Micro ATX standard, allowing it to fit into a wide range of cases while maximizing space for additional components. Overall, the Intel D102GGC2 motherboard offers a solid mix of features, performance, and expandability, making it a suitable choice for budget-conscious builds or as a reliable platform for everyday computing tasks. With a balance of modern connectivity options and legacy support, it caters to a variety of users looking for a dependable foundation for their PC needs.